Centon
Centon S1-S3A-2T 2TB 2.5" SATA internal SSD
2.5" SATA internal SSD delivering 520 MB/s reads and 490 MB/s writes for faster boots and application response
- Form Factor2.5"
- Capacity2TB
- InterfaceSATA III
- CacheNo DRAM (SLC)
- Faster boot and application response with 520 MB/s sequential read
- Quicker file saves and transfers at 490 MB/s sequential write
- Greater reliability and longer lifespan thanks to no moving parts
- Extended laptop battery life from low power consumption
- Works in older systems with SATA II backward compatibility
Capacity and interface
This Centon S1-S3A-2T is a 2TB internal solid-state drive in the 2.5 inch form factor with a SATA III interface. It is designed to replace a mechanical hard drive in laptops or desktops and deliver faster boot and application load times.
Suitable uses and limits
The drive suits anyone upgrading an older SATA-based system who wants lower power draw and silent operation without moving parts. It is less appropriate for platforms that only provide M.2 PCIe slots or for workloads needing sustained write throughput beyond the SLC cache.
Sequential speed rating
Sequential read reaches 520 MB/s and sequential write reaches 490 MB/s over the SATA III link, so those figures determine whether the drive meets the performance target for a given upgrade.
Kohokohdat
- Faster boot and application response with 520 MB/s sequential read
- Quicker file saves and transfers at 490 MB/s sequential write
- Greater reliability and longer lifespan thanks to no moving parts
- Extended laptop battery life from low power consumption
- Works in older systems with SATA II backward compatibility
Tekniset tiedot
| Brand | Centon |
|---|---|
| Model | S1-S3A-2T |
| Part Number | S1-S3A-2T |
| Form Factor | 2.5" |
| Capacity | 2TB |
| Interface | SATA III |
| Cache | No DRAM (SLC) |
| Lähetyspaino | 0.09 kg |
| Pakkauksen mitat | 127 × 10 × 5 mm |
Kysymyksiä tästä tuotteesta
Should I pick the 2TB SATA III version or a smaller capacity?
The 2TB model gives you the full 520 MB/s read and 490 MB/s write speeds in a 2.5 form factor; smaller capacities may have lower write performance.
What do the 520 MB/s read and 490 MB/s write figures mean once the drive is installed in my laptop?
Those are sequential speeds measured on a SATA III link; real-world boot and app launches will feel much faster than a hard drive but will not exceed those numbers.
The drive uses SATA III — what does that cap in practice?
SATA III limits the drive to its rated 520 MB/s read and 490 MB/s write; it also works in older SATA II slots at reduced throughput.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
