Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR2 memory modules with gold contacts and black chips in a row

Computer Memory Solutions

Computer Memory Solutions 16GB (4x4GB) DDR2 667 ECC Fully Buffered DIMM - B104

SKU CH-06V0-PJWZC

A 16 GB kit of four 4 GB DDR2 667 ECC fully buffered DIMMs for HP ProLiant XW6400, XW6600, XW8400 and XW8600 workstations

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 16 GB kit for HP ProLiant workstations
  • DDR2 667 MHz speed for PC2 5300 bandwidth
  • Fully buffered ECC design protects data integrity
  • 240-pin DIMM form factor fits XW6400, XW6600, XW8400, XW8600
  • Four matched 4 GB modules simplify installation

16GB DDR2-667 Fully Buffered ECC Kit

This 16 GB kit contains four 4 GB DDR2-667 fully buffered ECC DIMMs built for HP ProLiant XW6400, XW6600, XW8400 and XW8600 workstations. The modules run at 1.8 V with CL5 5-5-5 timings and use a 240-pin form factor. They are designed for server and workstation boards that require registered memory.

Who This Suits and Who It Does Not

It suits administrators upgrading or repairing the listed ProLiant models with matched, fully buffered ECC memory. It does not suit builders using desktop boards that accept only unbuffered non-ECC DDR2, nor systems limited to lower densities or different pin layouts.

Deciding Specification: Fully Buffered DDR2-667 ECC

The defining attribute is the fully buffered DDR2-667 ECC interface; the motherboard must explicitly support FB-DIMM technology at this speed. Without that support the modules will not function, so verify the platform requirement before ordering.

Kohokohdat

  • 16 GB kit for HP ProLiant workstations
  • DDR2 667 MHz speed for PC2 5300 bandwidth
  • Fully buffered ECC design protects data integrity
  • 240-pin DIMM form factor fits XW6400, XW6600, XW8400, XW8600
  • Four matched 4 GB modules simplify installation

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM512725300FBDIMM
Capacity16GB (4 x 4GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCYes
Buffered/RegisteredFully Buffered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemHp Proliant Xw6400 Xw6600, Xw8400, Xw8600
Package Content4 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

What DDR2 standard does this PC2 5300 kit run at, and what speed does it cap at?

The kit runs at the DDR2 667 standard, which caps the data rate at 667 MHz.

What physical slot and pin count do the four 4 GB modules need?

Each module is a 240-pin fully buffered DIMM, so the system must provide 240-pin DDR2 slots.

How are the sticks installed in the HP ProLiant XW6400, XW6600, XW8400 or XW8600, and what step is often missed?

Power off the workstation, open the chassis, align the notch on each 240-pin module with the slot key, press firmly until the retention clips lock, then populate all four slots in the order shown in the system service guide to enable quad-channel operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.