Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR4 DIMM sticks, no heat spreader, 288 pins each

Computer Memory Solutions

Computer Memory Solutions 32GB (2x16GB) DDR4 2400 CL17 HP Prodesk 490 G3 MT 600 G2 G3

SKU CH-6732-927RV

32GB dual-channel DDR4-2400 CL17 kit for HP ProDesk 490 G3 MT and 600 G2/G3 series desktops

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 32 GB dual-channel kit keeps HP ProDesk workloads responsive
  • CL17 timing at 2400 MHz delivers low-latency data access
  • 2 V unbuffered DIMMs reduce power draw and heat
  • Guaranteed compatibility with ProDesk 490 G3 MT and 600 G2/G3 series
  • Two 16 GB modules populate two of four slots for easy 64 GB max

HP Prodesk 490 G3 MT and 600 G2/G3 upgrade

This 32 GB kit contains two 16 GB DDR4 DIMMs rated at 2400 MHz with CL17 timings. The modules are unbuffered, non-ECC and run at 1.2 V. They are built specifically for the listed HP Prodesk tower and small-form-factor models.

Suits owners of compatible HP Prodesk systems

Buyers whose machines accept only 16 GB modules or require registered or ECC memory cannot use this kit. The product is also unsuitable for laptops, notebooks or any platform that uses SODIMM slots.

Deciding specification: DDR4 2400 CL17 288-pin DIMM

The motherboard must support DDR4 at 2400 MHz with unbuffered, non-ECC 288-pin DIMMs. If the system requires a different speed, voltage or form factor, the modules will not function.

Kohokohdat

  • 32 GB dual-channel kit keeps HP ProDesk workloads responsive
  • CL17 timing at 2400 MHz delivers low-latency data access
  • 2 V unbuffered DIMMs reduce power draw and heat
  • Guaranteed compatibility with ProDesk 490 G3 MT and 600 G2/G3 series
  • Two 16 GB modules populate two of four slots for easy 64 GB max

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM2048642400DIMM
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP/Compaq Prodesk 490 G3 MT, 600 G2 Series SFF/MT, 600 G3 Series MT/SFF
Package Content2 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

How do I confirm the 32GB DDR4 2400 CL17 kit is running at the correct speed after installation?

Enter the BIOS or use a tool such as CPU-Z; the memory should report 2400 MHz (PC4-19200) with timings of 17-17-17 at 1.2 V.

What comes in the box and is anything else required for installation?

The package contains two 16 GB 288-pin DDR4 DIMM modules; no additional parts are needed for compatible HP ProDesk 490 G3 MT, 600 G2 or 600 G3 systems.

Should I choose the 32 GB (2×16 GB) kit or a different capacity for my ProDesk 600 G3 MT?

This 32 GB kit fills two of the four slots; the platform supports up to 64 GB, so select this kit if 32 GB meets your workload or add a second identical kit to reach the 64 GB maximum.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.