Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR3 ECC registered DIMMs with gold contacts

Computer Memory Solutions

Computer Memory Solutions 32GB (4x8GB) DDR3 1333MHz ECC Registered DIMM for Dell PowerEdge R710 - B103

SKU CH-VYZR-AH2B0

A 32 GB kit of four 8 GB DDR3 1333 MHz ECC registered DIMMs validated for the Dell PowerEdge R710 server

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 32 GB quad kit expands server memory to 32 GB
  • Registered ECC design protects data integrity in Dell PowerEdge R710
  • DDR3 1333 MHz CL9 timing matches system specifications
  • 5 V operation reduces power draw per module
  • 240 pin DDR3 form factor installs in 18 DIMM slots

Dell PowerEdge R710 memory kit

This 32 GB kit contains four 8 GB registered ECC DIMMs built for the Dell PowerEdge R710 server. The modules run at DDR3-1333 with CL9 timing and 1.5 V voltage. They are intended for administrators upgrading or repairing that specific platform.

Installation notes

Each stick uses the standard 240-pin DDR3 form factor and seats in one of the 18 RDIMM sockets across six banks of three. Mixing registered ECC with unbuffered ECC modules is not supported by the system. Population rules limit quad-rank DIMMs to four per system and reduce speed to 800 MHz when a second dual-channel bank is filled.

Compatibility checklist

Verify that your R710 currently uses registered ECC memory and that you have free RDIMM slots within the allowed bank layout. The server automatically clocks DDR3-1333 modules down to 1066 MHz or 800 MHz depending on the installed Xeon model and bank population. This kit will not work in systems requiring unbuffered ECC or non-ECC UDIMMs.

Kohokohdat

  • 32 GB quad kit expands server memory to 32 GB
  • Registered ECC design protects data integrity in Dell PowerEdge R710
  • DDR3 1333 MHz CL9 timing matches system specifications
  • 5 V operation reduces power draw per module
  • 240 pin DDR3 form factor installs in 18 DIMM slots

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM10247210600ECCR2R4H
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemDell Poweredge R710
Package Content4 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

How can I verify the kit is running at 1333 MHz with ECC registered operation after installation?

Enter the system BIOS or use a tool such as CPU-Z to confirm the memory speed reads 1333 MHz, the type shows DDR3 ECC registered, and all 32 GB are detected across the four slots.

What exactly ships in the box and is anything else required to install it in a PowerEdge R710?

The package contains four 8 GB DDR3 240-pin registered ECC DIMMs; no extra parts or cables are needed for a standard R710 installation.

Is this 32 GB (4×8 GB) quad-rank kit the right choice for my R710, or should I pick a different capacity or rank?

The R710 supports up to 288 GB with registered ECC RDIMMs; this 32 GB 2Rx4 kit works within the 18-slot limit and will clock to 1066 MHz or 800 MHz depending on the Xeon model and bank population.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.