Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3 DIMM modules without heat spreaders

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR3 1600 CL11 240-pin for HP Pro 6305 Mt/Sff - A82

SKU CH-C5J6-399WA

A 4GB dual-channel DDR3 kit running at 1600MHz with CL11 timing, built for HP Pro 6305 MT/SFF desktops

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 4 GB total capacity expands system memory to 32 GB maximum
  • Dual-channel 2×2 GB kit boosts bandwidth on HP Pro 6305
  • DDR3-1600 CL11 timing delivers responsive performance at 1.5 V
  • 240-pin unbuffered non-ECC DIMMs install directly in compatible Pro 6305 MT/SFF
  • Guaranteed compatibility with listed HP part numbers including C1E17UT and E2A23UT

HP Pro 6305 MT/SFF memory kit

This 4GB kit supplies two 2GB unbuffered DDR3 DIMMs built to the PC3-12800 standard. It targets owners of the listed HP business desktops who need a straightforward capacity increase. The modules run at 1.5V with CL11 timings and carry no heat spreader. Installation is a direct swap into the 240-pin slots.

Sustained-load behaviour

The JEDEC 1600MHz rating and 11-11-11 timings remain stable during extended workloads because the modules operate at the standard 1.5V without overclocking headroom. Unbuffered single-rank organisation keeps signal integrity consistent across all populated slots. Thermal output stays modest without a spreader, relying on normal chassis airflow.

Upgrade context

This kit replaces or adds to the factory memory in HP Pro 6305 MT and SFF systems identified by the supplied part numbers. The jump is worthwhile when the board currently holds less than 4GB or when empty 240-pin sockets are available. Maximum supported capacity for these models is 32GB, so further expansion remains possible after this install.

Kohokohdat

  • 4 GB total capacity expands system memory to 32 GB maximum
  • Dual-channel 2×2 GB kit boosts bandwidth on HP Pro 6305
  • DDR3-1600 CL11 timing delivers responsive performance at 1.5 V
  • 240-pin unbuffered non-ECC DIMMs install directly in compatible Pro 6305 MT/SFF
  • Guaranteed compatibility with listed HP part numbers including C1E17UT and E2A23UT

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM2566412800DIMMSR
Capacity4GB (2 x 2GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Pro 6305 Mt/Sff
Package Content2 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

How much heat and power will the 1.5 V DDR3 1600 kit draw when the Pro 6305 runs all day?

At 1.5 V the unbuffered DDR3 modules draw only modest power and produce little heat, so the Pro 6305’s standard cooling handles continuous operation without extra airflow.

What must already be present in the HP Pro 6305 MT/SFF for these 240-pin DIMMs to work?

The system needs free 240-pin DDR3 slots that accept 1.5 V unbuffered non-ECC memory; the Pro 6305 MT/SFF chassis provides up to four such sockets.

Will the CL11 1600 MHz modules run at their rated speed alongside the original memory in a Pro 6305?

The kit is guaranteed compatible with the Pro 6305 MT/SFF; when installed together the memory will operate at the highest common speed supported by the platform.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.