Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Computer Memory Solutions

Computer Memory Solutions 4GB DDR3-1333 PC3-10600 CL9 240-pin DIMM memory upgrade

SKU CH-N0YR-DPVS1

A 4 GB DDR3-1333 module rated CL9 at 1.5 V for HP Pavilion p6-2000z, p6-2003w, p6-2010es and p6-2011 desktops

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 4GB DDR3-1333 capacity for smooth multitasking on compatible HP Pavilion desktops
  • CL9 latency at 1.5V for responsive system performance
  • 240-pin unbuffered non-ECC DIMM fits HP p6-2000z, p6-2003w, p6-2010es, p6-2011
  • Single 4GB module with 2Rx8 organisation installs in one of two slots
  • Major-brand chipset components backed by CMS lifetime warranty

4GB DDR3-1333 DIMM for HP Pavilion Desktops

This 4GB DDR3-1333 module is built for HP Pavilion p6-2000z, p6-2003w, p6-2010es and p6-2011 systems. It uses a 240-pin DIMM form factor and runs at PC3-10600 speed with CL9 timing. The stick is unbuffered, non-ECC and operates at 1.5V. It suits owners of those specific desktops who need a direct replacement or a simple capacity increase.

Installation is a standard DIMM slot insertion

Power down the PC, open the case and press the module into an empty 240-pin slot until the retention clips click. The system has two sockets and the supplier notes a 4GB limit with a 32-bit OS or 8GB with a 64-bit OS. The most common issue is exceeding that OS-dependent ceiling, which prevents the extra memory from being recognised.

Suits HP Pavilion p6-2000 series owners adding RAM

Buyers with one of the listed Pavilion models who want a straightforward upgrade will find this module matches the required specifications. It is not for systems that require ECC, registered memory, a different DDR generation or a voltage other than 1.5V. Builders needing more than the OS-supported maximum should look at a platform that supports higher capacity.

Kohokohdat

  • 4GB DDR3-1333 capacity for smooth multitasking on compatible HP Pavilion desktops
  • CL9 latency at 1.5V for responsive system performance
  • 240-pin unbuffered non-ECC DIMM fits HP p6-2000z, p6-2003w, p6-2010es, p6-2011
  • Single 4GB module with 2Rx8 organisation installs in one of two slots
  • Major-brand chipset components backed by CMS lifetime warranty

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Pavilion P6-2000Z, P6-2003W, P6-2010Es, P6-2011
Package Content1 Memory RAM Stick

Kysymyksiä tästä tuotteesta

How can I confirm the module is running at 1333 MHz with CL9 timing after installation?

Enter the system BIOS or use a tool such as CPU-Z to verify the reported speed shows 1333 MHz and the timings read 9-9-9 at 1.5V.

What comes in the package and is anything else required for installation?

The box contains one 4 GB 240-pin DDR3 DIMM; no additional parts are needed — just an empty DIMM slot on the motherboard.

Which capacity should I choose for a 64-bit OS on these HP Pavilion models?

The 4 GB stick is the listed option; a 64-bit OS supports up to 8 GB total, so adding a second identical module would reach that limit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.