Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 100-pin SODIMM memory stick with black chips

Computer Memory Solutions

Computer Memory Solutions 512MB DDR 333 PC2700 100-pin SODIMM memory upgrade

SKU CH-9D7D-38E39

512 MB DDR 333 SODIMM upgrade for Lexmark C524Dtn, C530Dn, C532, C532Dn, C532N and C534Dn printers

  • Capacity512MB
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Timing3-3-3
  • Voltage2.5V
  • ECCNo
  • 512 MB capacity lets the printer handle larger jobs
  • 333 MHz DDR speed matches the PC2700 spec for responsive operation
  • 100-pin SODIMM form factor fits the listed Lexmark models directly
  • CL2.5 latency with 3-3-3 timing delivers reliable data access
  • 5 V unbuffered non-ECC design meets the original system requirements

Compatible Lexmark Printer Upgrade

This 512MB DDR 333 SODIMM module is designed for Lexmark C524Dtn, C530Dn, C532, C532Dn, C532N and C534Dn printers. It uses a 100-pin form factor and operates at 2.5V with CL2.5 timing. The stick is unbuffered and non-ECC, matching the original specification for these devices.

Suitable For Single-Socket Expansion

The module suits users upgrading a compatible Lexmark printer to the maximum 512MB per socket. It is not for buyers who need ECC error correction or registered buffering. It is also not for anyone whose printer requires a different pin count, voltage or speed grade than those listed.

100-Pin SODIMM Form Factor

The 100-pin SODIMM interface is the single specification that determines fit. If the target printer uses a different connector or DDR generation, this module will not install. Verify the socket type before purchase.

Kohokohdat

  • 512 MB capacity lets the printer handle larger jobs
  • 333 MHz DDR speed matches the PC2700 spec for responsive operation
  • 100-pin SODIMM form factor fits the listed Lexmark models directly
  • CL2.5 latency with 3-3-3 timing delivers reliable data access
  • 5 V unbuffered non-ECC design meets the original system requirements

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM512MBPC2700100PIN
Capacity512MB
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Timing3-3-3
Voltage2.5V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemLexmark C524Dtn, C530Dn, C532 C532Dn, C532N, C534Dn
Package Content1 Memory RAM Stick

Kysymyksiä tästä tuotteesta

Should I buy the single 512MB stick or add a second one to reach the 1GB maximum?

Each slot accepts up to 512MB and the printer has two sockets, so installing two of these modules will reach the 1GB limit.

Will the DDR 333 (PC2700) rating deliver its full 333 MHz speed in these Lexmark printers?

The module runs at 333 MHz with CL2.5 timing at 2.5V, matching the printer's memory bus specification.

What does the 100-pin SODIMM interface mean for installation?

The 100-pin SODIMM form factor fits directly into the printer's memory slots without adapters.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.