Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3 DIMM modules, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 8GB (2×4GB) DDR3 1333MHz CL9 1.5V Non-ECC DIMM memory upgrade

SKU CH-YMY7-2X39H

DDR3 1333 MHz kit provides 8 GB in two 4 GB unbuffered non-ECC DIMMs for HP Z210 SFF workstations

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 8 GB total capacity from two 4 GB modules
  • 1333 MHz DDR3 speed rated at PC3-10600
  • CL9 latency with 9-9-9 timing at 1.5 V
  • Unbuffered non-ECC DIMM built for HP Z210 SFF
  • Guaranteed compatible with HP workstation part numbers VA811UT, VA810UT, VA813UT, VA817UT, VA816UT

8 GB DDR3 kit for HP Z210 SFF

This 8 GB kit consists of two 4 GB DDR3 1333 MHz non-ECC DIMMs built for the HP Z210 Small Form Factor workstation. The modules run at 1.5 V with CL9 timings and are unbuffered, matching the platform's standard memory specification. They are validated for HP manufacturing numbers VA811UT, VA810UT, VA813UT, VA817UT and VA816UT. Installation simply fills two of the four available slots.

Steady throughput under continuous load

Because the sticks operate at the native 1333 MHz bus speed with fixed 9-9-9 latency, bandwidth remains consistent during long rendering, compilation or virtualisation sessions. The absence of a heat spreader is offset by the workstation's directed airflow, keeping temperatures stable without throttling. Error correction is not present, so the kit suits workloads that tolerate standard parity checks rather than mission-critical data integrity.

Upgrade from 4 GB or 8 GB single-module configs

The Z210 supports up to 16 GB of non-ECC unbuffered memory across four sockets, so this dual-channel pair doubles capacity over a single 4 GB stick and leaves two slots free for future expansion. The jump is worthwhile when current memory pressure causes paging during multitasking or when moving to 64-bit applications that benefit from more than 8 GB total. Systems already at 16 GB non-ECC will not gain capacity from this kit.

Kohokohdat

  • 8 GB total capacity from two 4 GB modules
  • 1333 MHz DDR3 speed rated at PC3-10600
  • CL9 latency with 9-9-9 timing at 1.5 V
  • Unbuffered non-ECC DIMM built for HP Z210 SFF
  • Guaranteed compatible with HP workstation part numbers VA811UT, VA810UT, VA813UT, VA817UT, VA816UT

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Workstation Hp Z210 Small Form Factor
Package Content2 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

How much power do the 1.5V DDR3 modules draw when the Z210 runs all day?

Each module operates at the standard 1.5V DDR3 voltage; total system draw depends on the workstation's memory controller and workload.

Which motherboard slots must be free to install the 240-pin DIMM kit?

The HP Z210 Small Form Factor provides four 240-pin DDR3 sockets; you need two adjacent free slots for this 2×4GB kit.

Can I keep the original 4GB sticks and add this kit to reach the 16GB non-ECC limit?

Yes, the Z210 supports up to 16GB of non-ECC unbuffered memory across its four sockets, so adding this 8GB kit to existing modules stays within that limit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.