Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3 ECC registered DIMMs in anti-static tray

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3-1333 ECC Reg 2Rx4 CL9 1.5V for IBM System x3620 M3 7376

SKU CH-XJWY-8FGH1

Eight-gigabyte dual-stick kit of registered ECC DDR3-1333 memory built for the IBM System x3620 M3 7376 server

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • ECC Registered design protects data integrity in server workloads
  • 2 x 4 GB kit delivers 8 GB total capacity for IBM System x3620 M3 7376
  • DDR3-1333 speed with CL9 latency matches system specifications
  • 5 V operation and 240-pin form factor ensure correct electrical and physical fit
  • Modules automatically clock down to 1066 MHz or 800 MHz depending on Xeon configuration and bank population

System-specific DDR3 kit

This 8 GB kit contains two 4 GB registered ECC modules built for the IBM System x3620 M3 7376. It is intended for server administrators who need validated memory for that exact platform. Buyers upgrading consumer desktops or workstations that require unbuffered non-ECC DDR3 cannot use this kit.

Registered ECC DDR3-1333

Each module runs at 1333 MHz with CL9 timing at 1.5 V and uses a 2Rx4 organisation. The registered buffer and ECC function are mandatory for the target server; systems without registered ECC support will not accept these DIMMs. The modules automatically clock down to 1066 MHz or 800 MHz depending on the installed Xeon and how many of the twelve sockets are populated.

Straightforward DIMM installation

The 240-pin DIMMs seat in the server's twelve slots across four banks of three; follow the platform's population order for the Xeon model installed. A common issue is mixing registered and unbuffered modules or filling banks in the wrong sequence, which prevents the system from posting.

Kohokohdat

  • ECC Registered design protects data integrity in server workloads
  • 2 x 4 GB kit delivers 8 GB total capacity for IBM System x3620 M3 7376
  • DDR3-1333 speed with CL9 latency matches system specifications
  • 5 V operation and 240-pin form factor ensure correct electrical and physical fit
  • Modules automatically clock down to 1066 MHz or 800 MHz depending on Xeon configuration and bank population

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM5127210600ECCR2R4H
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemIbm System X3620 M3 7376
Package Content2 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

Will the kit run at the full 1333 MHz in my System x3620 M3?

The modules automatically clock down to 1066 MHz or 800 MHz depending on the installed Xeon model and how many of the 12 sockets are populated.

What does PC3 10600 mean for bandwidth in this server?

PC3 10600 is the peak transfer rate label for DDR3 1333; actual throughput will match the lower clock speed the memory controller negotiates.

Do the two 4 GB sticks fit the 240-pin slots in the 7376 chassis?

Yes, each module is a 240-pin DDR3 ECC Registered DIMM designed for the 12 sockets in the System x3620 M3 7376.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.