EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Computer Memory Solutions
8GB dual-channel DDR3 SODIMM kit rated 1333 MHz CL7 for Toshiba Satellite A665 laptops
This 8 GB kit contains two 4 GB DDR3 SODIMM modules rated at 1333 MHz with CL7 timing. It is built for Toshiba Satellite A665 series notebooks including the A665-3Dv12X, A665-3Dv6 and A665-3Dv7 models. The 204-pin unbuffered design matches the factory slot layout in those systems.
The modules run at 1.5 V and use major-brand chips configured as 2Rx8 rank. Without a heat spreader they rely on the laptop’s internal airflow, so temperatures will follow the chassis cooling capacity during long sessions. CL7 latency stays consistent at the rated 1333 MHz speed.
Confirm your notebook is listed in the compatible model range and that it accepts 204-pin DDR3 SODIMMs at 1.5 V. The kit is non-ECC and unbuffered, so it will not work in systems requiring registered or error-correcting memory. Two slots are needed for the full 8 GB capacity.
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126410600SODRH |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL7 |
| Timing | 7-7-7 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Toshiba Satellite A665-3Dv12X, A665-3Dv6, A665-3Dv7 |
| Package Content | 2 Memory RAM Sticks |
The kit operates at the standard 1.5 V DDR3 voltage, so heat output and power draw match typical DDR3-1333 SODIMMs; no extra cooling is required.
The 204-pin SODIMMs plug directly into the laptop's memory slots; a small Phillips screwdriver to open the access panel is the only tool required.
The motherboard will run all installed modules at the slowest common speed and loosest timing, so mixing CL7 with CL9 simply drops the kit to CL9 without instability.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?