Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Computer Memory Solutions

Computer Memory Solutions CM128643200DIMM 2GB (2x1GB) DDR1 400MHz Dell Dimension 4600 4600C memory upgrade

SKU CH-3NHX-XRVF6

A 2 GB DDR1 kit (two 1 GB modules) rated at 400 MHz, designed for Dell Dimension 4600 and 4600C desktops

  • Capacity2GB (2 x 1GB)
  • Type184-Pin DDR SDRAM
  • SpeedDDR 400 (PC 3200)
  • CAS LatencyCL3
  • Timing3-3-3
  • Voltage2.6V
  • 2 GB kit expands Dell Dimension 4600 memory to 4 GB max
  • 184-pin DDR400 modules install directly into the four DIMM slots
  • CL3 3-3-3 timing at 2.6 V keeps legacy systems stable
  • Non-ECC unbuffered design matches original Dell specification
  • Major-brand chips backed by CMS lifetime guarantee

System-specific DDR1 upgrade

This 2GB kit contains two 1GB unbuffered DIMMs built for Dell Dimension 4600 and 4600C desktops. Each module runs at DDR400 speed with CL3 timing at 2.6V. The 184-pin design matches the original memory slots in these systems.

Sustained load behaviour

Under continuous operation the non-ECC modules rely on the system board for error handling. The 3-3-3 timing and major-brand chipset maintain stability at the rated 400MHz frequency. Heat spreaders are not fitted, so airflow inside the chassis determines thermal performance.

DDR1 interface limits

The DDR1 standard tops out at 400MHz and 2.6V for unbuffered DIMMs, so this kit reaches the ceiling of the technology. Builders needing more than 4GB total capacity or registered memory support cannot use this platform.

Kohokohdat

  • 2 GB kit expands Dell Dimension 4600 memory to 4 GB max
  • 184-pin DDR400 modules install directly into the four DIMM slots
  • CL3 3-3-3 timing at 2.6 V keeps legacy systems stable
  • Non-ECC unbuffered design matches original Dell specification
  • Major-brand chips backed by CMS lifetime guarantee

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM128643200DIMM
Capacity2GB (2 x 1GB)
Type184-Pin DDR SDRAM
SpeedDDR 400 (PC 3200)
CAS LatencyCL3
Timing3-3-3
Voltage2.6V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Dimension 4600, 4600C desktops
Package Content2 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

How much power does this 2.6 V DDR1 kit draw when the system runs all day?

Each module operates at 2.6 V, the standard voltage for DDR 400 memory. Actual power draw depends on the motherboard and workload, but the kit adds no extra heat spreader.

What must the motherboard provide for these two 184-Pin sticks to function?

The board needs two free 184-Pin DDR DIMM slots that accept non-ECC, unbuffered DDR 400 (PC 3200) memory at 2.6 V.

Will the CL3 timing on this kit match the latency of the original Dell memory?

The modules run at CAS latency 3 with 3-3-3 timing, which is the standard timing for DDR 400 PC 3200 memory.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.