Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green circuit boards with black chips and gold contacts

Computer Memory Solutions

Computer Memory Solutions CM2048642666DIMM 64GB (4x16GB) DDR4 2666MHz CL19 1.2V 288-Pin DIMM memory upgrade

SKU CH-MBF5-3GK2B

64 GB kit of four 16 GB DDR4 2666 MHz CL19 unbuffered DIMMs validated for Dell OptiPlex 7060 SFF, Tower and XE3 Tower

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Timing19-19-19
  • Voltage1.20V
  • 64 GB total capacity for demanding workloads
  • Guaranteed compatibility with Dell OptiPlex 7060 and XE3 Tower systems
  • Four 16 GB modules fill all four memory slots
  • DDR4 2666 MHz CL19 timing for responsive performance
  • Low 1.2 V operation reduces power draw

Dell OptiPlex 7060 memory kit

This 64GB kit contains four 16GB DDR4 DIMMs rated at 2666MHz with CL19 timings. It is built for Dell OptiPlex 7060 SFF, Tower and OptiPlex XE3 Tower systems that accept standard 288-pin unbuffered memory.

Four-slot upgrade path

The kit fills all four memory sockets on the supported OptiPlex platforms, delivering the maximum 64GB capacity those boards allow. Each module runs at 1.2V and uses a 2Rx8 organisation, so the CPU memory controller sees a consistent load across every channel.

Matched modules from one supplier

Computer Memory Solutions packages the four sticks as a single kit to avoid timing mismatches that can occur when mixing loose modules. The maker states that all parts are manufactured in-house rather than sourced from generic stock, and they provide a lifetime exchange or repair warranty against manufacturing defects.

Kohokohdat

  • 64 GB total capacity for demanding workloads
  • Guaranteed compatibility with Dell OptiPlex 7060 and XE3 Tower systems
  • Four 16 GB modules fill all four memory slots
  • DDR4 2666 MHz CL19 timing for responsive performance
  • Low 1.2 V operation reduces power draw

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM2048642666DIMM
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Timing19-19-19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell OptiPlex 7060 Small Form Factor (SFF), OptiPlex 7060Tower, OptiPlex XE3 Tower
Package Content4 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

Does the CL19 latency and 1.20V voltage limit how far the DDR4 2666 speed scales under sustained load?

The kit is rated for CL19 at 1.20V, so the modules run at DDR4 2666 within standard JEDEC limits; sustained workloads stay at that speed and voltage unless the platform applies a lower multiplier.

How much heat do four unbuffered 2Rx8 DIMMs produce when running all day in a Dell OptiPlex 7060 SFF?

Each 16GB stick operates at 1.20V without a heat spreader; typical DDR4 power at this voltage is low, so case airflow in the OptiPlex 7060 SFF or Tower is usually sufficient for continuous operation.

Must the OptiPlex 7060 or XE3 Tower already have four free 288-pin slots and a CPU that supports DDR4 2666?

Yes — the kit fills all four DIMM sockets (4 × 16GB) and requires a processor and chipset that run DDR4 at 2666MHz; the listed OptiPlex 7060 SFF, 7060 Tower and XE3 Tower meet that requirement.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.