Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Computer Memory Solutions

Computer Memory Solutions CM256645300SO 2GB DDR2 667MHz SODIMM for Emachines 250 Netbook Em250 memory upgrade

SKU CH-R74V-3V5HF

2GB DDR2 667MHz SODIMM module upgrades Emachines 250 Netbook Em250 memory with 200-pin PC2-5300 compatibility

  • Capacity2GB
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 2GB capacity doubles netbook memory headroom
  • DDR2 667MHz speed matches Emachines 250 spec
  • CL5 latency keeps timing tight at 5-5-5
  • 200-pin SODIMM form factor fits laptop slot
  • 8V operation runs cool on low-power platform

System-specific DDR2 upgrade for Emachines 250

This 2GB DDR2 667MHz SODIMM is built to match the Emachines 250 Netbook series. It installs in a 200-pin slot and runs at 1.8V with CL5 timing. The single module uses major-brand chips and requires no configuration.

Buyers with an Emachines 250 needing one 2GB stick

The kit contains exactly one 2GB module, so systems that already have two populated slots cannot use it without removing existing memory. Buyers who need ECC, registered memory or a different pin count should look elsewhere.

200-pin DDR2 SO-DIMM at 667MHz

The module follows the PC2 5300 standard with 5-5-5 timings and operates at 1.8V. It is unbuffered, non-ECC and organised as 2Rx8. This pin count and voltage are the deciding factors for compatibility with the Emachines 250 series.

Kohokohdat

  • 2GB capacity doubles netbook memory headroom
  • DDR2 667MHz speed matches Emachines 250 spec
  • CL5 latency keeps timing tight at 5-5-5
  • 200-pin SODIMM form factor fits laptop slot
  • 8V operation runs cool on low-power platform

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM256645300SO
Capacity2GB
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemEmachines 250 Netbook Series Em250 Series
Package Content1 Memory RAM Stick

Kysymyksiä tästä tuotteesta

Does my eMachines 250 netbook need an empty 200-pin SODIMM slot to accept this 2GB DDR2 667 module?

Yes, the module fits a 200-pin DDR2 SO-DIMM socket and each slot supports up to 2GB, so one free slot is required.

Will this CL5 1.8V DDR2 stick run stably if the other slot still has the original factory memory?

The module is unbuffered non-ECC DDR2 667 at 1.8V with CL5 timing; the system will clock both sticks to the slowest common speed and voltage.

How can I confirm the new stick is recognised at 2GB and 667 MHz after installation?

Check the BIOS memory summary or Windows Task Manager — it should show 2GB total for this module running at 667 MHz (PC2-5300).

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.