Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board SODIMM stick with black memory chips and gold edge connector

Computer Memory Solutions

Computer Memory Solutions CM256MBPC2100100PIN 256MB DDR 266 PC2100 SODIMM memory upgrade

SKU CH-EYHS-JYW6P

256MB DDR 266 PC2100 SODIMM memory upgrade for HP LaserJet 4250 series printers

  • Capacity256MB
  • SpeedDDR 266 (PC 2100)
  • CAS LatencyCL2.5
  • Timing3-3-3
  • Voltage2.5V
  • ECCNo
  • 256 MB capacity extends printer memory for larger print jobs
  • DDR 266 PC2100 speed matches HP LaserJet 4250 requirements
  • 100-pin SODIMM form factor fits the designated memory slot
  • Unbuffered non-ECC design ensures correct operation in compatible printers
  • New condition with manufacturer lifetime warranty provides reliable upgrade path

Purpose and audience

This 256MB SODIMM module is designed to upgrade HP LaserJet 4250 series printers including the 4250Dtn, 4250Dtnsl, 4250N and 4250Tn models. It adds memory capacity for handling larger print jobs and complex graphics. The module is not suitable for desktop PCs, laptops or any system that requires standard 144-pin or 200-pin SODIMM memory.

Critical specification

The memory uses a 100-pin SODIMM form factor operating at DDR 266 (PC2100) with a CAS latency of CL2.5 and 3-3-3 timing. It runs at 2.5V, is unbuffered and non-ECC. A system expecting a different pin count, voltage, speed or error-correction type will not accept this module.

Sustained workload behaviour

Under continuous printing loads the module maintains stable operation at its rated 266 MHz speed and 2.5V supply. The unbuffered design and major-brand chipset deliver consistent data throughput without throttling during extended print queues. No heat spreader is fitted, so adequate airflow inside the printer chassis is required for prolonged duty cycles.

Kohokohdat

  • 256 MB capacity extends printer memory for larger print jobs
  • DDR 266 PC2100 speed matches HP LaserJet 4250 requirements
  • 100-pin SODIMM form factor fits the designated memory slot
  • Unbuffered non-ECC design ensures correct operation in compatible printers
  • New condition with manufacturer lifetime warranty provides reliable upgrade path

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM256MBPC2100100PIN
Capacity256MB
SpeedDDR 266 (PC 2100)
CAS LatencyCL2.5
Timing3-3-3
Voltage2.5V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Laserjet 4250, 4250Dtn, 4250Dtnsl, 4250N, 4250Tn
Package Content1 Memory RAM Stick

Kysymyksiä tästä tuotteesta

What does the PC2100 266 MHz rating mean when the module is installed in an HP LaserJet 4250?

The module runs at 266 MHz DDR with CL2.5 timing, giving the printer 256 MB of PC2100 bandwidth for faster job buffering.

The spec lists 100-pin SODIMM — what does that interface cap in practice?

The 100-pin SODIMM slot limits the upgrade to DDR 266 PC2100 unbuffered non-ECC memory at 2.5 V.

Will this stick physically fit the memory slot on a LaserJet 4250Dtn?

Yes, it is a 100-pin SODIMM measuring the standard SODIMM form factor for the 4250 series printers.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.