Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 168-pin DIMM stick with black memory chips

Computer Memory Solutions

Computer Memory Solutions CM3272EDO 64MB 168-Pin EDO DIMM PC100 memory upgrade

SKU CH-EJJ7-AZFFN

64 MB EDO DIMM module running at PC100 with 60 ns access time for HP Designjet 1050C and 1055CM printers

  • Capacity64MB
  • Type168-Pin SDRAM
  • SpeedPC 100
  • Voltage5V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 64 MB capacity expands printer memory for large jobs
  • 168-pin EDO DIMM fits HP DesignJet 1050C and 1055CM
  • 60 ns access time speeds data handling
  • PC100 133 MHz rating matches system bus speed
  • ECC unbuffered design maintains data integrity

Direct replacement for HP DesignJet printers

This 64 MB 168-pin EDO DIMM is built to match the original C6258A specification for the HP DesignJet 1050C and 1055CM. It runs at PC100 speed with a 60 ns access time and operates at 5 V. The module is unbuffered, non-ECC, and uses major-brand chips for reliable operation in these large-format plotters.

Ideal for service technicians restoring legacy

Shops and owners who need a single stick to bring a DesignJet 1050C or 1055CM back to full memory capacity will find this part a direct fit. It is not suited for desktop PCs, servers or any system that requires SDRAM, DDR or registered modules, nor for machines that need more than 64 MB per slot.

5 V EDO electrical interface

The decisive specification is the 5 V EDO signalling on a 168-pin DIMM; only systems designed for that exact electrical and timing standard will accept the module. Verify the printer model against the HP DesignJet 1050C and 1055CM part number C6258A before ordering.

Kohokohdat

  • 64 MB capacity expands printer memory for large jobs
  • 168-pin EDO DIMM fits HP DesignJet 1050C and 1055CM
  • 60 ns access time speeds data handling
  • PC100 133 MHz rating matches system bus speed
  • ECC unbuffered design maintains data integrity

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM3272EDO
Capacity64MB
Type168-Pin SDRAM
SpeedPC 100
Voltage5V
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemHp Designjet 1050C, 1055Cm C6258A
Package Content1 Memory RAM Stick

Kysymyksiä tästä tuotteesta

Will the EDO DIMM need periodic replacement or maintenance after installation?

The module is a solid-state component with no moving parts and requires no scheduled maintenance; it remains in service until a system upgrade or failure occurs.

What limit appears first when the memory runs continuously in the DesignJet 1050C or 1055CM?

The 60 ns access time and PC100 133 MHz rating set the throughput ceiling, so sustained print-job buffering will hit that bandwidth limit before any thermal throttle.

How much heat or noise does the 5 V unbuffered stick produce during all-day operation?

With no active cooling and low-voltage SDRAM chips, the DIMM generates negligible heat and zero audible noise even under constant load.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.