Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR3 DIMM sticks, no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM5126410600DIMM 8GB (2x4GB) DDR3 1333MHz CL9 1.5V 240-pin Non-ECC Unbuffered 2Rx8

SKU CH-SP1F-FNZJ5

Two 4 GB DDR3 modules at 1333 MHz CL9 for HP/Compaq Business Pro 3500 and 3505 Microtower systems

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 8GB dual-channel kit expands system memory
  • 1333 MHz DDR3 speed matches PC3-10600 spec
  • CL9 9-9-9 timing at 1.5 V for stable operation
  • 240-pin non-ECC unbuffered DIMM fits HP/Compaq Business Pro 3500 and 3505
  • Two 4 GB 2Rx8 modules using major-brand chips

Targeted DDR3 Kit for HP Business Pro 3500 and 3505

This 8GB kit contains two 4GB unbuffered DIMMs built to the DDR3 1333 standard with CL9 timing. It is designed specifically for the HP/Compaq Business Pro 3500 and Business Pro 3505 Microtower systems. The modules run at 1.5V and use a 240-pin layout with 2Rx8 organisation. Buyers who need ECC error correction or registered modules cannot use this kit.

DDR3 1333 Bandwidth and Platform Ceiling

The PC3 10600 interface caps theoretical bandwidth at the DDR3 1333 data rate, so throughput cannot exceed what the memory controller and chipset allow on these platforms. Both supported systems only provide two DIMM sockets and a maximum memory limit of 8GB, so this kit fills every available slot. Builders who want more capacity or faster speeds must change the platform entirely.

Direct Replacement for Factory 4GB

Most units shipped with 4GB or 6GB across the two slots, so this matched pair doubles or completes the memory to the 8GB ceiling. The jump is worth it when multitasking causes heavy paging or when the integrated graphics share system memory. If the system already runs 8GB, this kit adds no usable capacity.

Kohokohdat

  • 8GB dual-channel kit expands system memory
  • 1333 MHz DDR3 speed matches PC3-10600 spec
  • CL9 9-9-9 timing at 1.5 V for stable operation
  • 240-pin non-ECC unbuffered DIMM fits HP/Compaq Business Pro 3500 and 3505
  • Two 4 GB 2Rx8 modules using major-brand chips

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp/Compaq Business Pro 3500, Business Pro 3505 Microt
Package Content2 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

Should I pick the 2×4 GB kit or a single 8 GB stick for my HP Business Pro 3500?

The 2×4 GB kit fills both DIMM slots on the Business Pro 3500 and 3505 Microtower, enabling dual-channel operation for higher memory bandwidth than a single module.

What does the PC3-10600 rating mean for actual throughput in my system?

PC3-10600 indicates a peak transfer rate of 10 600 MB/s at 1333 MHz; real-world throughput will be slightly lower due to latency and controller overhead.

Does the 240-pin DDR3 interface limit the speed I can run these modules at?

The 240-pin DDR3 interface supports up to 1333 MHz on this platform; the memory controller in the Business Pro 3500/3505 caps operation at that frequency.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.