Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green circuit boards with black chips and gold edge connectors

Computer Memory Solutions

Computer Memory Solutions CM5126410600SODRH 8GB (2×4GB) DDR3 1333 PC3-10600 CL7 1.5V SO-DIMM memory upgrade

SKU CH-CWR6-Z0BFQ

Dual 4 GB DDR3 SO-DIMM kit at 1333 MHz CL7 for compatible Apple iMac and MacBook Pro models

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8 GB total capacity delivered as two matched 4 GB modules
  • DDR3 1333 MHz speed with CL7 latency for responsive performance
  • 5 V operation matches original Apple iMac specifications
  • 204-pin SO-DIMM form factor fits compatible 21.5-inch and 27-inch iMac models
  • Unbuffered non-ECC design installs directly in supported Mac mini and MacBook Pro systems

System-specific DDR3 SO-DIMM kit

This 8 GB kit contains two 4 GB DDR3 1333 SO-DIMM modules built to PC3-10600 specification with CL7 timing and 1.5 V operation. The unbuffered, non-ECC sticks use a 204-pin layout and 2Rx8 organisation. Computer Memory Solutions validates compatibility with the Apple systems listed in the specifications.

Suits owners upgrading a listed iMac.

Buyers whose Mac requires a different DDR generation, ECC registered modules or a higher total capacity than 8 GB cannot use this kit. The two-slot limit on supported machines also means no further expansion is possible beyond these two sticks.

204-pin DDR3 SO-DIMM form factor

Only systems that accept 204-pin DDR3 SO-DIMM memory at 1333 MHz with CL7 timing and 1.5 V voltage can install these modules. Verify the exact model against the compatible list before purchase.

Kohokohdat

  • 8 GB total capacity delivered as two matched 4 GB modules
  • DDR3 1333 MHz speed with CL7 latency for responsive performance
  • 5 V operation matches original Apple iMac specifications
  • 204-pin SO-DIMM form factor fits compatible 21.5-inch and 27-inch iMac models
  • Unbuffered non-ECC design installs directly in supported Mac mini and MacBook Pro systems

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemApple Imac Intel Core I5/I7 27-Inch
Package Content2 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

What real-world bandwidth does the PC3-10600 rating deliver once installed?

The PC3-10600 rating corresponds to a peak transfer rate of 10,600 MB/s at 1333 MHz, which is the maximum theoretical bandwidth the memory controller can use in compatible Macs.

How does the 204-pin SO-DIMM interface limit upgrade options on these Macs?

The 204-pin DDR3 SO-DIMM slot is the only memory interface on the listed iMac, Mac mini and MacBook Pro models, so only unbuffered, non-ECC DDR3 modules at 1.5 V can be used.

Will the two 4 GB sticks fit the 27-inch iMac (Mid 2010) and 15-inch MacBook Pro (Early 2011) without clearance issues?

Yes, both systems use standard 204-pin SO-DIMM sockets with two slots; the low-profile modules have no heat spreader and match the 2Rx8 rank layout specified for those models.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.