Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green circuit boards with black memory chips and gold edge connectors

Computer Memory Solutions

Computer Memory Solutions CM5126410600SODRH 8GB (2×4GB) DDR3 1333MHz CL7 1.5V 204-pin SO-DIMM memory upgrade

SKU CH-8MRZ-XABHW

Two 4 GB DDR3 SO-DIMM modules at 1333 MHz CL7 for 2010 Apple iMac Core i3, i5 and i7 models

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 8 GB dual-channel kit for faster multitasking
  • CL7 low latency for responsive performance
  • 1333 MHz DDR3 speed matches iMac specs
  • 5 V standard voltage for stable operation
  • Guaranteed compatible with 21.5" and 27" Mid 2010 iMacs

Ready-to-install kit for specific iMacs

This 8 GB kit contains two 4 GB DDR3 1333 MHz SO-DIMMs built to the PC3-10600 standard. They run at 1.5 V with CL7 7-7-7 timing and use unbuffered, non-ECC chips on a 204-pin form factor. The modules are validated for the Apple iMac Core i3, i5 and i7 models listed by the manufacturer.

Fits 2010 iMacs with four SO-DIMM slots

The memory is qualified for the 21.5 inch and 27 inch Intel Core i3, i5 and i7 iMacs released in mid-2010 that support up to 16 GB across four sockets. It will not work in laptops or desktops that require a different pin count, voltage or DDR generation, nor in systems that demand ECC or registered memory.

204-pin DDR3 SO-DIMM interface

The single specification that decides fitment is the 204-pin DDR3 SO-DIMM interface running at PC3-10600 speed. If the target machine uses that exact slot and signalling standard, the kit installs directly; otherwise the modules are physically and electrically incompatible.

Kohokohdat

  • 8 GB dual-channel kit for faster multitasking
  • CL7 low latency for responsive performance
  • 1333 MHz DDR3 speed matches iMac specs
  • 5 V standard voltage for stable operation
  • Guaranteed compatible with 21.5" and 27" Mid 2010 iMacs

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemApple Imac Core I3, I5, I7
Package Content2 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

My iMac has four SO-DIMM slots — can I add this 2×4GB kit alongside the two 2GB modules already installed?

Yes — the Mid 2010 iMacs listed have four slots and a 16GB maximum, so adding this 8GB kit to an existing 4GB gives 12GB total, well within the limit.

Does the 1.5V requirement match the voltage used by Mid 2010 iMac memory slots?

The modules are standard 1.5V DDR3 SO-DIMMs, which is the voltage those iMac models expect for unbuffered non-ECC memory.

After installing the pair, how can I confirm both 4GB sticks are recognised at 1333MHz CL7?

Open About This Mac → System Report → Memory; you should see two 4GB DIMMs listed at 1333MHz with a CAS latency of 7.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.