Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR3 DIMM sticks, 240-pin, no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM5127210600ECCR2R4H 16GB (4x4GB) DDR3 1333MHz ECC Registered DIMM memory upgrade

SKU CH-7G2C-M9Q7Y

Four-module 16 GB DDR3 1333 MHz ECC registered kit validated for Asus Z9Pe-D8 WS servers

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 16 GB kit (4 × 4 GB) for server capacity
  • DDR3 1333 MHz CL9 for stable throughput
  • ECC registered 2Rx4 design protects data integrity
  • Validated for Asus Z9Pe-D8 WS server board
  • 5 V operation matches DDR3 specification

Targeted Server Memory Kit

This 16 GB kit contains four 4 GB DDR3 registered DIMMs rated at 1333 MHz with CL9 timing. It is built specifically for the Asus/Asmobile Z9 Server Board Z9Pe-D8 WS and carries ECC error correction for data integrity in server workloads.

Straightforward DIMM Installation

The modules use the standard 240-pin DDR3 form factor and slot directly into the board’s memory sockets. Registered signalling adds electrical load, so the system BIOS must be configured for registered memory; mixing these with unbuffered DIMMs will prevent the server from posting.

For Single-Board Server Upgrades

This kit suits administrators who need to populate all four slots per CPU on the named Z9 platform with validated ECC registered memory. It is not for desktop PCs, laptops or any motherboard that requires unbuffered non-ECC DDR3 or a different pin layout.

Kohokohdat

  • 16 GB kit (4 × 4 GB) for server capacity
  • DDR3 1333 MHz CL9 for stable throughput
  • ECC registered 2Rx4 design protects data integrity
  • Validated for Asus Z9Pe-D8 WS server board
  • 5 V operation matches DDR3 specification

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM5127210600ECCR2R4H
Capacity16GB (4 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemAsus/Asmobile Z9 Server Board Z9Pe-D8 Ws
Package Content4 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

How do I verify the kit is running at 1333 MHz with CL9 timing after installation?

Check the memory speed and CAS latency in the BIOS or a tool such as CPU-Z; the modules should report DDR3-1333 (PC3-10600) at 9-9-9 timing when the system is configured correctly.

What is included in the package and do I need anything else to install it?

The box contains four 4 GB DDR3 registered ECC DIMMs; no extra parts are required, but the motherboard must support registered ECC memory and have four available 240-pin slots.

Should I choose the 1.5 V or 1.35 V version for the Z9PE-D8 WS board?

The kit supplied here is rated at 1.5 V; the board will automatically adjust voltage and speed based on the installed Xeon processor and population of memory banks.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.