Thermalright MC-2 ARGB Memory Cooler White 3200 RPM
- Fan & Heatsinks
- DDR/DDR2/DDR3/DDR4/…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Cooler Master
A 240 mm all-in-one liquid cooler with dual 120 mm ARGB PWM fans, a 3100 RPM dual-chamber pump and 400 mm tubing for AMD AM5/AM4 and Intel LGA 1851/1700 sockets
The Cooler Master MasterLiquid ML240R RGB is a 240 mm all-in-one liquid cooler designed for mainstream CPU sockets. It targets builders who want quiet liquid cooling with addressable RGB lighting in a white finish. The unit fits AMD AM4, AM5 and Intel LGA 1700 and 1851 platforms. It arrives pre-filled and ready for straightforward installation.
This cooler replaces basic boxed air coolers or entry-level 120 mm AIOs when lower noise and better thermal headroom matter. The jump is worth it if your current cooler hits high fan speeds under sustained loads. The dual-chamber pump runs at 3100 RPM with a 25 dBA rating, while the two 120 mm fans operate between 650 and 1750 RPM at up to 30 dBA. Included Cryo-Fuze paste simplifies the swap.
The 240 mm aluminium radiator and dual 120 mm fans move up to 120 m³/h of airflow for typical mid-range CPU workloads. It comfortably handles gaming and productivity sessions without thermal throttling. Headroom decreases with heavily overclocked high-core-count processors that exceed the radiator dissipation area. The 400 mm tubing length allows flexible routing in most standard chassis layouts.
| Series | MasterLiquid ML240R RGB |
|---|---|
| Type | AIO |
| Pump Speed | 3100 ± 300 RPM |
| Pump Dim. | 83 x 76.2 x 52.3 mm / 3.3 x 3 x 2.1 inch |
| Pump Bearing | Sleeve Sleeve Bearings |
| Pump Noise | 25 dBA |
| Radiator Size | 240 mm |
| Radiator Material | Aluminum |
| Fan Size | 2 Fan Slots (120 mm) |
| Fan Dim. | 120 x 120 x 25 mm / 4.7 x 4.7 x 1.0 inch |
| Bearing Type | Sleeve Bearings |
| Fan RPM | 650-1750 RPM ± 10% |
| Fan Air Flow | 120m³/h (70.7CFM) |
| Fan Noise | 30 dBA |
| Fan Connector | 7-Pin PWM + ARGB |
| Color | White |
| LED Color | ARGB |
The radiator is 240 mm long and each fan measures 120 x 120 x 25 mm, so you need room for a 240 mm radiator plus 25 mm fan thickness on the mounting side.
Orient the infinity mirror pump cover so the logo is upright, then connect the 7-pin PWM+ARGB cable to the motherboard header; the step often missed is plugging in the ARGB lead for lighting control.
Reapply the supplied Cryo-Fuze paste whenever you remove the pump from the CPU, typically every two to three years or if temperatures rise noticeably.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?