Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White 120mm case fan with dual RGB rings, 24 addressable LEDs, rubber corner pads, 25mm thick, 4-pin PWM connector

Cooler Master

Cooler Master MFL-B2DW-18NPA-R1 MasterFan MF120 Halo White Edition 120mm case fan

SKU CH-JHHN-DCH87 MPN MFL-B2DW-18NPA-R1

A 120 mm white case fan with 24 addressable RGB LEDs, hybrid static-pressure blades and PWM speed control from 650 to 1800 RPM

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeRifle
  • 24 individually controlled ARGB LEDs create vivid dual-ring lighting
  • Hybrid static-pressure blade design pushes air through radiators and mesh panels
  • Rifle bearing and sound-absorbing pads keep noise between 6 and 30 dBA
  • PWM control adjusts speed from 650 to 1800 RPM for 47.2 CFM airflow
  • White 120 mm frame with 25 mm thickness fits standard case mounts

White 120 mm case fan for RGB builds

The Cooler Master MasterFan MF120 Halo White Edition is a single 120 mm case fan finished in white. It targets builders who want addressable RGB lighting on both sides of the blade and need a fan that fits standard 120 mm mounting points. The unit ships with four screws and an ARGB holster for cable management.

Rifle bearing with rubber pads and PWM control

A rifle bearing and sound-absorbing rubber pads on the corners reduce vibration transferred to the chassis. The 4-pin PWM connector allows the motherboard to vary speed between 650 and 1800 RPM, so the fan runs quietly at idle and ramps up only when thermal load demands it. No separate fan controller is included or required.

47.2 CFM static-pressure airflow for radiators

The hybrid blade design delivers 47.2 CFM with a focus on static pressure, making the fan suitable for CPU liquid-cooling radiators or restrictive mesh panels. Noise stays between 6 and 30 dBA across the speed range. Buyers who need higher airflow volume for open-air cases or who want a multi-fan kit with a bundled controller should look elsewhere.

Kohokohdat

  • 24 individually controlled ARGB LEDs create vivid dual-ring lighting
  • Hybrid static-pressure blade design pushes air through radiators and mesh panels
  • Rifle bearing and sound-absorbing pads keep noise between 6 and 30 dBA
  • PWM control adjusts speed from 650 to 1800 RPM for 47.2 CFM airflow
  • White 120 mm frame with 25 mm thickness fits standard case mounts

Tekniset tiedot

BrandCOOLER MASTER
SeriesMasterFan MF120 Halo White Edition
ModelMFL-B2DW-18NPA-R1
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeRifle
RPM650 - 1800 RPM +/- 10%
Air Flow47.2 CFM +/- 10%
Noise Level6 - 30 dBA
Power Connector4-Pin PWM
ColorWhite
LEDAddressable RGB
FeaturesDuo-Ring Addressable RGB Lighting: 24 Individually Controlled ARGB LEDs for a stunning visual effect.
Performance Engineered: Hybrid Static Pressure blade design to tackle resistances in CPU liquid radiator, low-noise or mesh chassis ventilation while boosting overall airflow
Silent Cooling Technology: Noise Reduction Technology and Sound Absorbing Materials for a quieter and longer lifespan cooling solution
PWM Fan Control: Dynamic speed adjustment between 650 rpm to 1,800 rpm, minimizing noise or maximizing airflow
Certified Compatibility: Compatible with most of Addressable RGB ca
Dimensions120 x 120 x 25 mm
Package ContentsMasterFan MF120 Halo White Edition
4 x Screws
1 x ARGB Holsters
Manual
Lähetyspaino0.23 kg
Pakkauksen mitat208 × 130 × 28 mm

Kysymyksiä tästä tuotteesta

What does the 4-pin PWM connector let the motherboard control on this fan?

The 4-pin PWM connector allows the motherboard to vary the fan speed dynamically between 650 and 1800 RPM, so the system can minimise noise at idle or maximise airflow under load.

What mounting hardware is included to secure the 120 mm by 120 mm by 25 mm frame?

The box contains four mounting screws and an anti-loose clip that keeps the power connection from working free during vibration.

How do I connect the addressable RGB lighting so it syncs with my motherboard software?

Plug the supplied ARGB holster into a 5 V 3-pin addressable RGB header on the motherboard, then enable the device in Aura Sync, Mystic Light or Polychrome Sync to control the 24 individually addressable LEDs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.