Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White mid-tower case with blue accents, tempered glass side panel, USB-C front port

Corn Electronics

Corn Electronics Arashi Custom Edition M-ATX/ITX PC case

SKU CH-SGYE-M70GE

Holds M-ATX or ITX boards with 390 mm GPU clearance, dual 3.5" and 2.5" bays, top 360 mm radiator support, front USB 3.2 Type-C and USB 3.0 Type-A ports, and tempered glass side window

  • TypeATX / Micro ATX Mid Tower
  • ColorWhite / Blue
  • Case MaterialABS / SPCC / Tempered Glass
  • With Power SupplyNo
  • Motherboard CompatibilityM-ATX/ITX
  • Side Panelwith Side Window

Options Ghost Knife

Näytä 3 muuta kokoonpanoa
  • Supports M-ATX and ITX motherboards for compact builds
  • Fits graphics cards up to 390 mm long for high-end GPUs
  • Accommodates CPU coolers up to 170 mm tall for strong air cooling
  • Top mounts 360, 280 or 240 mm radiators for liquid cooling
  • Front I/O includes USB 3.0 Type-A and USB 3.2 Type-C Gen2 ports

Compact M-ATX/ITX Chassis

The Corn Electronics Arashi Custom Edition is a mid-tower case built for Micro-ATX and Mini-ITX motherboards. Its white and blue Ghost Knife manga theme adds a distinct visual identity to compact builds. The chassis uses ABS, SPCC steel and tempered glass panels to balance structure and component visibility.

Installation Notes

Motherboard standoffs align with M-ATX and ITX patterns, and five expansion slots give room for full-length add-in cards. Dust filters are included to reduce intake buildup. The power-supply compartment accepts units up to 270 mm deep with cables routed, or 390 mm if the hard-drive cage is removed. Cable routing space behind the motherboard tray is tight, so plan wire lengths before final assembly.

Cooling and Storage Limits

Top mounts support 120 mm or 140 mm fans in three- or two-fan layouts, plus radiators up to 360 mm. A single 120 mm rear fan and three 120 mm fans at the power partition are also possible. Two 3.5-inch and two 2.5-inch drive bays set the storage ceiling. Graphics cards are limited to 390 mm length and CPU coolers to 170 mm height.

Kohokohdat

  • Supports M-ATX and ITX motherboards for compact builds
  • Fits graphics cards up to 390 mm long for high-end GPUs
  • Accommodates CPU coolers up to 170 mm tall for strong air cooling
  • Top mounts 360, 280 or 240 mm radiators for liquid cooling
  • Front I/O includes USB 3.0 Type-A and USB 3.2 Type-C Gen2 ports

Tekniset tiedot

BrandAigo
Serieslan
TypeATX / Micro ATX Mid Tower
ColorWhite / Blue
Case MaterialABS / SPCC / Tempered Glass
With Power SupplyNo
Motherboard CompatibilityM-ATX/ITX
Side Panelwith Side Window
Dust FiltersYes
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots5
Front Ports1 x USB 3.0 TYPE-A, 1 x USB 3.2 TYPE-C Gen2, 1 x Mic, HD Audio
Fan OptionsTop: 120mm*3/140mm*2 Motherboard: 120mm*2
Rear: 120mm*1 Power Partition: 120mm*3
Radiator OptionsTop cover: 360/280/240 cold row
Max GPU Length390 mm
Max CPU Cooler Height170 mm
Max PSU LengthDepth of power supply compartment: 270mm (including cables)/390mm (including cables and no hard disk compartment)
Dimensions455.8*235*430mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will a 390 mm graphics card fit without removing the front drive cage?

The case supports graphics cards up to 390 mm long, so a card of that length fits with the standard layout.

Can I install a 360 mm radiator in the top and still use the motherboard fan mounts?

Yes, the top accepts 360, 280 or 240 mm radiators and the motherboard area still fits two 120 mm fans.

What is the maximum CPU cooler height if I keep the side glass panel?

The case allows CPU coolers up to 170 mm tall, which includes most tower coolers while the tempered glass side panel is fitted.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.