NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Corn Electronics
Grey aluminium-and-glass tower supports EATX, ATX, MATX and ITX boards with room for 400 mm graphics cards and 170 mm CPU coolers
Options MOD-3 (Grey)
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
The Corn Electronics MOD3 is a grey aluminium-and-tempered-glass chassis built for EATX, ATX, Micro-ATX and Mini-ITX motherboards. It suits builders who want an open-frame aesthetic with a 5 V ARGB strip on the front panel and room for a full-size power supply mounted at the bottom.
Graphics cards up to 400 mm long and CPU coolers up to 170 mm tall fit comfortably; the PSU bay accepts standard ATX PS2 units no longer than 195 mm. Drive options cover two 2.5-inch SSDs plus one 3.5-inch HDD, or three 2.5-inch SSDs, while seven expansion slots handle multi-card setups.
The power-supply cavity stops at 195 mm, so longer ATX or redundant units will not install. Buyers with oversized PSUs or who need more than three 2.5-inch drives should look elsewhere.
| Brand | Jonsbo |
|---|---|
| Model | MOD3 |
| Type | EATX; ATX; MATX; ITX |
| Color | Grey |
| Case Material | Aluminum / Tempered Glass |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | ATX / E-ATX / Micro ATX / Mini ITX |
| Side Panel | with Side Window |
| LED | ARGB Strip Front Panel |
| External 5.25" Drive Bays | 2.5SSD×2+3.5HDD×1 Or 2.5SSD*3 |
| Expansion Slots | 7 |
| Front Ports | USB 3.0×2/AUDIO×1/MIC×1 |
| Fan Options | 3×120mm Fan (optional) Front:3×120mm Fan (optional) |
| Max GPU Length | 400mm |
| Max CPU Cooler Height | 170mm |
| Max PSU Length | Standard ATX PS2(Not longer than 195mm) |
The MOD3 supports EATX boards and graphics cards up to 400mm long, so both will fit provided the card does not exceed that length.
Connect the ARGB header to a 5V addressable RGB header on the motherboard, then use the board's lighting software to verify the strip illuminates and responds to colour changes.
The case includes no fans and no power supply; both must be purchased separately.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?