Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green PCB riser card with USB 3.0 cable and 6-pin power connector

Corn Electronics

Corn Electronics Ver006C PCIe 1X to 16X Riser 60cm USB 3.0 6Pin Power

SKU CH-TKZQ-PSNXN

PCIe 1x to 16x riser cable with 60 cm USB 3.0 link and 6-pin power for GPU mining rigs

  • TypeRiser Card
  • External USB Ports1x USB Port
  • PCIe 1x to 16x extension for flexible GPU placement
  • 60 cm USB 3.0 cable enables distant card mounting
  • 6-pin power connector supplies dedicated GPU power
  • Four solid capacitors stabilise voltage delivery
  • Overcurrent protection guards hardware from power spikes

Dedicated Mining Riser Kit

The Corn Electronics Ver006C is a PCIe 1X to 16X riser designed for GPU-based cryptocurrency mining rigs. It connects a graphics card to any motherboard PCIe slot including 1X, 4X, 8X and 16X sizes. The 60cm USB 3.0 cable provides flexible placement inside open-air frames or rack-mounted builds.

Installation Steps and Common Errors

Plug the riser into the motherboard slot first, then attach the 6-pin power connector before inserting the graphics card. The supplier warns against forcing cables or reversing the plug direction, as either can burn equipment or break socket pins. A fireproof adhesive pad on the PCB back adds a layer of protection during assembly.

PCIe 1X Bandwidth Limit

The adapter uses a single PCIe lane, so the graphics card operates at 1X electrical speed regardless of the 16X physical connector. This is standard for mining workloads but restricts throughput for gaming or compute tasks that need full bandwidth. The 60cm length and USB 3.0 signalling define the practical reach and signal quality.

Kohokohdat

  • PCIe 1x to 16x extension for flexible GPU placement
  • 60 cm USB 3.0 cable enables distant card mounting
  • 6-pin power connector supplies dedicated GPU power
  • Four solid capacitors stabilise voltage delivery
  • Overcurrent protection guards hardware from power spikes

Tekniset tiedot

TypeRiser Card
External USB Ports1x USB Port

Kysymyksiä tästä tuotteesta

Will this riser fit a standard ATX motherboard with a 16x slot?

Yes, the riser plugs into any PCIe slot — 1x, 4x, 8x or 16x — so it works with standard ATX boards.

What power connector does the riser need from the PSU?

It uses a 6 pin power connector; plug the cable into the PSU first, then seat the riser firmly.

How long is the cable so I can space the GPU away from the board?

The cable is 60 cm long, giving enough reach for open-air frames or rack builds.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.