Corsair CMK16GX4M2B3000C15 Vengeance LPX 16GB DDR4 3000 desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Corsair
A 16 GB DDR4 kit running at 3000 MHz with CL15 timings and an aluminum heatspreader for overclocking headroom
Capacity 16GB (2 x 8GB)
This Corsair Vengeance LPX kit delivers 16 GB of DDR4 memory in two 8 GB modules rated at 3000 MT/s with CL15 timings. It targets enthusiasts and gamers who want responsive, high-bandwidth memory for demanding workloads.
The low-profile anodized aluminum heatspreader fits tight clearances around large CPU coolers or in compact cases. Unbuffered, non-ECC operation at 1.35 V works with standard consumer motherboards, while the eight-layer PCB aids thermal management and signal integrity.
Enable the XMP 2.0 profile in the BIOS to apply the rated 15-17-17-35 timings and 3000 MT/s speed without manual tuning. Each IC is individually screened for overclocking headroom, and the red heatspreader colour coordinates with themed builds.
| Brand | CORSAIR |
|---|---|
| Series | Vengeance LPX |
| Model | CMK16GX4M2B3000C15R |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3000 (PC4 24000) |
| CAS Latency | CL15 |
| Timing | 15-17-17-35 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Red |
| Heat Spreader | Anodized Aluminum |
| Features | Designed for high-performance overclocking Each Vengeance LPX module is built with a pure aluminum heatspreader for faster heat dissipation and cooler operation; and the eight-layer PCB helps manage heat and provides superior overclocking headroom. Each IC is individually screened for performance potential. Designed for great looks Available in multiple colors to match your motherboard, your components, or just your style. Performance and Compatibility Vengeance LPX is optimized and compatibility tested for the latest Intel 100 Series motherboards and offers higher frequencies, great |
| Recommend Use | High Performance or Gaming Memory |
| Lähetyspaino | 0.09 kg |
| Pakkauksen mitat | 155 × 91 × 18 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The 1.35 V operating voltage and anodized aluminum heatspreader with an eight-layer PCB are designed to dissipate heat efficiently, keeping modules cooler during sustained high-performance use.
Vengeance LPX modules have no moving parts; the pure aluminum heatspreader and eight-layer PCB manage thermals silently, so the kit stays quiet and runs cool under continuous load.
Yes, the kit uses an Intel XMP 2.0 profile to set 3000 MT/s with 15-17-17-35 timings at 1.35 V; without XMP 2.0 the motherboard will default to a lower JEDEC speed.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?