Corsair CMZ4GX3M1A1600C9B 4GB DDR3 1600 desktop RAM
- 4GB
- DDR3 1600 (PC3 1280…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Corsair
A 16 GB quad-channel DDR3 kit with four 4 GB modules running at 1600 MHz, CL9 timing and 1.50 V
Capacity 16GB (4 x 4GB)
This Corsair Vengeance kit supplies 16 GB of DDR3 desktop memory across four matched 4 GB modules. It targets builders who need a full quad-channel population on a compatible platform or who want to maximise slot utilisation on a dual-channel board. The blue heat spreader gives a clean visual identity inside the case.
Each module uses the standard 240-pin DIMM form factor and seats in a regular DDR3 slot without tools. Because the kit is rated at 1.50 V it aligns with the default voltage of many Sandy Bridge-era platforms, so the system usually posts at the rated 1600 MHz without manual BIOS changes. The tall heat spreader can interfere with oversized CPU coolers, so verify clearance before ordering.
The critical figure is the 1600 MHz speed combined with CL9 9-9-9-24 timings at 1.50 V. If your motherboard and memory controller support DDR3-1600 at that voltage and latency, the kit will run at its rated specification; otherwise it will down-clock to the highest common setting.
| Brand | CORSAIR |
|---|---|
| Series | Vengeance |
| Model | CMZ16GX3M4A1600C9B |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL9 |
| Timing | 9-9-9-24 |
| Voltage | 1.50V |
| Multi-channel Kit | Quad Channel Kit |
| Color | Blue |
| Heat Spreader | Yes |
| Features | Maximize your system memory capacity for ultimate performance Specially selected RAMs for overclocked performance 1.5 V VDIMM spec ensures compatibility with 2nd generation (Sandy Bridge) Intel Core processor family Includes XMP performance profile Guaranteed to work on all dual channel Intel platforms Aggressive Look you want Attractively low price World famous Corsair reliability and performance Cerulean Blue heatsink |
| Recommend Use | High Performance or Gaming Memory |
| Lähetyspaino | 0.24 kg |
| Pakkauksen mitat | 152 × 124 × 20 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit contains four 4 GB modules in a standard 240-pin DIMM form factor. If your motherboard has four DDR3 slots and supports 1600 MHz at 1.5 V, the modules will install directly.
Yes. The 1.50 V specification is designed for compatibility with 2nd generation Intel Core processors and motherboards that require the standard DDR3 voltage.
CAS latency 9 at 1600 MHz gives low access latency for gaming and multitasking. The full 9-9-9-24 cycle set is the rated JEDEC profile, so the kit runs at these timings without manual BIOS adjustment.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?