Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Corsair

Corsair CP-9020296-NA RM850e 850 W power supply

SKU CH-V8AR-27JJ9 MPN CP-9020296-NA

A fully modular ATX 3.1 power supply delivering 850 W with a 120 mm fan, 140 mm depth and Cybenetics Gold efficiency

  • ColorBlack
  • TypeATX 3.1 Compatible
  • Maximum Power850 W
  • Fans1 x 120 mm
  • Main Connector24Pin
  • Max PSU Length140 mm
  • Fully modular cabling reduces clutter because you connect only the cables your build needs
  • ATX 3.1 compliance supports PCIe 5.1 platforms handling 2x transient GPU power spikes
  • 120 mm rifle bearing fan with a calculated curve keeps noise low even at full load
  • 105 °C rated capacitors deliver steady, reliable power and dependable electrical performance
  • Modern Standby compatibility enables extremely fast wake-from-sleep times and better low-load efficiency

Fully modular ATX 3.1 power supply

The Corsair RM850e delivers 850 W through a fully modular cable set, so only the needed leads are installed. It meets the ATX 3.1 standard and includes a 12VHPWR connector for PCIe 5.1 graphics cards. A 120 mm rifle bearing fan runs on a calculated curve to limit noise at full load. Cybenetics Gold certification confirms high efficiency across the load range.

Ideal for modern GPU builds.

Builders assembling a PCIe 5.1 graphics card will benefit from the native 12VHPWR cable and ATX 3.1 transient response. Systems that rely solely on older 6+2 pin PCIe connectors and do not need the new standard can consider simpler units. The 140 mm depth fits most mid-tower cases, but very compact chassis should verify clearance. Modern Standby support suits users who want fast wake-from-sleep.

12VHPWR connector decides compatibility

The single 12VHPWR (12+4) cable is the defining feature for current-generation graphics cards. If the GPU requires that connector, this unit supplies it directly without adapters. If the build uses only 8-pin or 6+2-pin PCIe power, the 12VHPWR lead will remain unused.

Kohokohdat

  • Fully modular cabling reduces clutter because you connect only the cables your build needs
  • ATX 3.1 compliance supports PCIe 5.1 platforms handling 2x transient GPU power spikes
  • 120 mm rifle bearing fan with a calculated curve keeps noise low even at full load
  • 105 °C rated capacitors deliver steady, reliable power and dependable electrical performance
  • Modern Standby compatibility enables extremely fast wake-from-sleep times and better low-load efficiency

Tekniset tiedot

BrandCORSAIR
SeriesRMx Series
ModelRM850e
Part NumberCP-9020296-NA
ColorBlack
TypeATX 3.1 Compatible
Maximum Power850 W
Fans1 x 120 mm
Main Connector24Pin
Max PSU Length140 mm
ModularFull Modular
Energy-EfficientCybenetics Gold
Input Voltage100 - 240 V
Input Frequency Range47 - 63 Hz
Input Current+3.3V@20A, +5V@20A, [email protected] , +5Vsb@3A
Connectors1 x 12VHPWR (12+4) PCIe / 1 x 24 pin ATX / 1 x 8 pin (6+2) PCIe / 6 x SATA
Lähetyspaino2.93 kg
Pakkauksen mitat286 × 188 × 127 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 12VHPWR connector on this 850 W unit work with a graphics card that only has an 8-pin PCIe socket?

The PSU includes a 12VHPWR 12+4 connector and a separate 8-pin 6+2 PCIe cable; use the 6+2 cable for older cards and keep the 12VHPWR for newer GPUs.

How can I confirm the fan curve is behaving correctly once the system is running?

The 120 mm rifle-bearing fan spins up under load and stays quiet at idle; listen for low noise during heavy GPU workloads to verify the curve is active.

Which cables are included and what must I source separately for a typical build?

The box supplies the 24-pin ATX, one 8-pin 6+2 PCIe, one 12VHPWR 12+4 and six SATA connectors; additional PCIe or EPS cables are not included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.