Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two black 140mm PWM fans with translucent blades and RGB hub lighting, plus a small Lighting Node CORE controller

Corsair

Corsair iCUE SP140 RGB ELITE 140mm Dual Fan Kit CO-9050111-WW

SKU CH-7PD5-R63FE MPN CO-9050111-WW

A dual 140mm PWM fan kit with hydraulic bearings, AirGuide anti-vortex vanes, eight addressable RGB LEDs per fan and an included iCUE Lighting Node CORE controller

  • Fan Counts2 Fans
  • Fan ControllerController
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size140mm
  • Fan Thickness25mm

Fan Size 140mm

Option 2 Packs

  • AirGuide vanes concentrate airflow for focused cooling
  • Eight individually addressable RGB LEDs per fan enable vivid lighting
  • iCUE Lighting Node CORE included for software control via USB 2.0 and SATA
  • Hydraulic bearing runs as quietly as 18 dBA at low speed
  • PWM speeds up to 1200 RPM deliver up to 68.11 CFM airflow

Dual 140 mm PWM fans with Lighting Node CORE

This kit includes two 140 mm PWM case fans and a Lighting Node CORE controller. Each fan uses hydraulic bearings and CORSAIR AirGuide anti-vortex vanes to concentrate airflow. Eight individually addressable RGB LEDs per fan connect through the controller for software-managed lighting effects.

Builders adding synchronised RGB cooling

The fans suit systems that can mount 140 mm units and have a USB 2.0 header plus SATA power for the Lighting Node CORE. Builders needing 120 mm mounting holes, a different connector type, or fans without RGB illumination should consider other options.

450 to 1 200 RPM speed range

Pulse-width modulation lets the fans spin between 450 and 1 200 RPM with a tolerance of ten percent. At the lower end they produce 18 dBA and 23.07 CFM; at the upper end they reach 26.8 dBA and 68.11 CFM with 1.66 mm-H2O static pressure. This range decides whether the airflow and noise profile matches the thermal target.

Kohokohdat

  • AirGuide vanes concentrate airflow for focused cooling
  • Eight individually addressable RGB LEDs per fan enable vivid lighting
  • iCUE Lighting Node CORE included for software control via USB 2.0 and SATA
  • Hydraulic bearing runs as quietly as 18 dBA at low speed
  • PWM speeds up to 1200 RPM deliver up to 68.11 CFM airflow

Tekniset tiedot

BrandCorsair
SeriesiCUE SP140 RGB ELITE Dual Fan Kit
ModelCO-9050111-WW
Fan Counts2 Fans
Fan ControllerController
TypeCase Fan
CompatibilityCase
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic
RPM450 - 1200 +/- 10% RPM
Air Flow23.07 - 68.11 CFM
Noise Level18 - 26.8 dBA
Power Connector4 Pin
ColorBlack
LEDRGB
FeaturesCORSAIR AirGuide Technology: Utilizes anti-vortex vanes to direct airflow and concentrate cooling, improving cooling whether used as intake, exhaust, or mounted to a liquid cooling radiator or heatsink.
Eight Individually Addressable RGB LEDs: Complete your CORSAIR SP RGB ELITE-cooled system with an additional fan, equipped with eight LEDs around the hub.
iCUE Lighting Node CORE Included: Control RGB lighting via CORSAIR iCUE software with this compact RGB Lighting Controller, cutting down cable clutter with simple USB 2.0 and SATA connections.
Your Setup at Your Command: Create vivi
Dimensions140mm x 140mm x 25mm
Package Contents2 x CORSAIR SP140 RGB ELITE fans
8 x mounting screws
1 x CORSAIR Lighting Node CORE
Lähetyspaino0.28 kg
Pakkauksen mitat173 × 152 × 86 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What is included in the box and do I need to buy anything else to run the RGB lighting?

The kit contains two 140mm SP140 RGB ELITE fans, eight mounting screws and a Lighting Node CORE controller that connects via USB 2.0 and SATA power. No separate RGB controller is required.

Should I choose the dual-fan kit or look for a single-fan version?

This MPN CO-9050111-WW is sold only as a two-fan kit with the Lighting Node CORE included. If you need just one extra fan, Corsair offers single SP140 RGB ELITE fans without a controller.

What does the 68.1 CFM airflow figure mean when the fans are mounted on a radiator?

At the maximum 1200 RPM the pair can push up to 68.1 CFM with 1.66 mm-H₂O static pressure. AirGuide anti-vortex vanes concentrate that flow through radiator fins, so real-world cooling stays close to the rated number.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.