Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green bare circuit board DDR5 DIMM with black memory chips and gold edge contacts

Crucial

Crucial MTC10F1084S1RC48BR 16GB DDR5 4800 CL40 ECC Registered server RAM

SKU CH-JCKR-6RT8C MPN MTC10F1084S1RC48BR

16GB DDR5-4800 ECC Registered server memory with CL40 latency at 1.10V

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR5 4800 boosts server throughput
  • CL40 latency keeps response times tight
  • 10V operation cuts power draw per module
  • ECC and registered design protects data integrity
  • 288-pin DIMM fits standard server slots

Server DDR5 module for registered ECC systems

This 16 GB Crucial DDR5-4800 DIMM is built for servers and workstations that require registered memory with error correction. It operates at 1.10 V and uses a single-rank 1Rx8 organisation. The module has no heat spreader.

Registered ECC with CL40 latency at 4800 MT/s

The key specification is the registered ECC design combined with a CL40 CAS latency at the DDR5-4800 data rate. This combination determines compatibility with platforms that mandate registered buffers and error-correcting code. Systems needing unbuffered or non-ECC memory cannot use this module.

Standard 288-pin DIMM installation

Installation follows the usual 288-pin DIMM procedure: align the notch, press firmly until the retention clips engage. Because the module lacks a heat spreader, clearance is rarely an issue. The main risk is mixing registered ECC with unbuffered or non-ECC DIMMs, which prevents the system from posting.

Kohokohdat

  • 16GB DDR5 4800 boosts server throughput
  • CL40 latency keeps response times tight
  • 10V operation cuts power draw per module
  • ECC and registered design protects data integrity
  • 288-pin DIMM fits standard server slots

Tekniset tiedot

BrandCrucial
Part NumberMTC10F1084S1RC48BR
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Heat SpreaderNo
FeaturesMicron server DRAM - Speed up your servers. | Micron Server DRAM increases performance and helps maximize IT budgets.
Speed up applications and get more out of your IT budget with Micron Server DRAM. Maximizing installed memory capacity with Micron Server DRAM is one of the easiest and most affordable ways to make your deployments faster and more efficient.
Speed up server applications
By installing Micron DRAM, you'll be able to maximize the performance capability of your CPUs and optimize your servers' computing potential. Since memory typically functions as a fixed (non-shared) co
Lähetyspaino0.45 kg
Pakkauksen mitat163 × 51 × 13 mm

Kysymyksiä tästä tuotteesta

What does the 4800 MT/s rating deliver in a live server?

The module runs at DDR5 4800 (PC5 38400) with CL40 latency, giving your CPUs the bandwidth to keep more threads fed without waiting on memory.

How does the registered ECC interface affect usable speed and data integrity?

Registered buffering adds one cycle of control stability, while on-die ECC corrects single-bit errors in real time, letting the 4800 MT/s bus run reliably under sustained load.

What physical slot and power does the 1Rx8 288-pin DIMM require?

It fits a standard DDR5 288-pin RDIMM socket and operates at 1.10 V, with no heat spreader to clear oversized CPU coolers.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.