Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 2U rack-mount UPS with LCD panel, eight outlets and ten-foot cord

CyberPower

CyberPower PR1500RT2UC 1500 VA 1500 W UPS

SKU CH-NQWK-42T86 MPN PR1500RT2UC

Rack-mountable sine-wave UPS delivers 1500 VA and 1500 W through eight NEMA 5-15R outlets with 6.5 minutes runtime at full load

  • International Version120V
  • Input Voltage Range75 - 149 VAC
  • Input Frequency47 - 63 Hz
  • Input ConnectionNEMA 5-15P
  • VA Rating1500 VA
  • Watts1500 W
  • 1500 VA and 1500 W capacity powers critical rack equipment
  • Pure sine wave output protects sensitive servers from power gaps
  • AVR corrects voltage fluctuations without draining the battery
  • LCD panel rotates 90° and tilts for easy monitoring
  • 2 minutes runtime at half load allows safe shutdown

Rack-mountable sine-wave UPS

The CyberPower PR1500RT2UC is a line-interactive uninterruptible power supply delivering 1500 VA and 1500 W of sine-wave output. It fits a 2U rack space or stands as a tower and accepts 75 to 149 VAC input through a NEMA 5-15P plug on a 10 ft cord. Eight NEMA 5-15R outlets provide battery-backed and surge-protected power for connected equipment.

Suited for servers and sensitive electronics

The sine-wave output and automatic voltage regulation protect active-PFC power supplies and precision gear from distortion and brownouts. Remote management is possible via the optional RMCARD205 network card and PowerPanel Business software. Buyers needing longer runtime at full load or input voltage outside the 100 to 125 VAC nominal range should consider other solutions.

6.5-minute runtime at full 1500 W load

At maximum rated load the internal sealed lead-acid battery sustains output for 6.5 minutes, rising to 18.2 minutes at half load. Recharge to 90 % capacity takes three hours. This runtime figure determines whether the unit allows enough time for safe shutdown or generator start-up in your environment.

Kohokohdat

  • 1500 VA and 1500 W capacity powers critical rack equipment
  • Pure sine wave output protects sensitive servers from power gaps
  • AVR corrects voltage fluctuations without draining the battery
  • LCD panel rotates 90° and tilts for easy monitoring
  • 2 minutes runtime at half load allows safe shutdown

Tekniset tiedot

BrandCyberPower
SeriesSmart App Sinewave UPS Series
ModelPR1500RT2UC
International Version120V
Input Voltage Range75 - 149 VAC
Input Frequency47 - 63 Hz
Input ConnectionNEMA 5-15P
VA Rating1500 VA
Watts1500 W
Output Voltage100/110/120/125 VAC +/- 5%
Output Frequency50/60 Hz +/- 1%
Outlets8
Outlet Type8 x NEMA 5-15R
Battery TypeSealed Lead Acid
Battery Run TimeFull Load 6.5 min
Half Load 18.2 min
Battery Recharge Time3 Hours (0% to 90% charged)
Battery ReplaceableYes
AlarmsBattery Mode
Low Battery
Overload
Overcharge
Fault
Interface Port1 Serial, 1 Dry Contact
Management SoftwarePowerPanel Business
Surge Energy Rating2430 Joules
ProtectionOn Battery: Internal Circuitry Limiting
On Utility: Circuit Breaker Protected
Dimensions17.1" x 3.4" x 16.2"
Weight55.3 lbs.
Lähetyspaino29.03 kg
Pakkauksen mitat559 × 508 × 279 mm

Kysymyksiä tästä tuotteesta

How loud is the PR1500RT2UC when it runs continuously in a rack?

The unit uses line-interactive topology with Automatic Voltage Regulation, so it stays on utility power for minor fluctuations and only engages the battery during outages, keeping fan noise low during normal operation.

Which management cable must I already have to use the serial or dry-contact ports?

One Serial and one Dry Contact port are built in; you supply the matching DB-9 serial cable or dry-contact wiring for your monitoring system.

Will the sine-wave output and 100-125 V range work with my older active-PFC power supplies?

Yes, the pure sine-wave output at 100/110/120/125 VAC ±5% is compatible with active-PFC equipment and prevents the shutdowns that simulated-sine units can cause.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.