darkFlash INF34R 120mm Reverse Blade PWM ARGB Case Fan
- Case Fan
- Case
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
darkFlash
A 120 mm case fan with reverse blades, magnetic daisy-chain wiring and 5 V ARGB lighting runs at 800–2000 RPM delivering 50–55 CFM at 30–35 dBA
Color Black
Quantity 1-Pack
Fan Direction Reverse
The darkFlash Gauss G24R is a 120 mm case fan that uses a patented 7-pin magnetic connector to link multiple units without extra cables. A 4-pin PWM header lets the motherboard vary speed between 800 and 2000 RPM, while the hydro bearing is rated for 40000 hours MTTF. Nine aerodynamic blades deliver 50-55 CFM at 30-35 dBA.
This fan suits anyone building a clean-look system where several fans share a single ARGB header and PWM signal. The 5 V 3-pin ARGB input works with ASUS Aura Sync, MSI Mystic Light, GIGABYTE RGB Fusion and ASRock Polychrome RGB. It is not for setups that only offer 12 V 4-pin RGB headers, nor for radiators that demand higher static pressure than 55 CFM can provide.
The box includes a PWM/ARGB splitter cable so one motherboard header can drive two fans, plus four anti-vibration pads and four mounting screws to dampen resonance. A printed user manual explains the magnetic daisy-chain orientation and the 5 V ARGB limitation. No software disc or controller hub is bundled.
| Brand | darkFlash |
|---|---|
| Part Number | G24 |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | 800-2000 PRM |
| Air Flow | 50-55 CFM |
| Noise Level | 30 - 35 dBA |
| Power Connector | 4-pin PWM |
| Color | Black |
| LED | ARGB |
| Features | Dreamy colorful ARGB lighting; Magnetic splice design; Aerodynamic blades; Magnetic wiring connector; FDB Hydro Bearing |
| Package Contents | 1 × Gauss?G24 ARGB Fan; 4 × Anti-vibration pads; 4 × Mounting screws; 1 × PWM/ARGB splitter cable; 1 × User manual |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the fan only supports 5 V 3-pin ARGB headers. Do not connect it to a 12 V RGB header or the lighting will not work and could be damaged.
No, the patented 7-pin magnetic connector only links to other darkFlash Gauss G24 fans. Older fans with separate PWM and ARGB cables cannot join the magnetic daisy chain.
Enter the BIOS or use fan-control software to verify the PWM curve moves the speed between 800 and 2000 RPM as the system temperature changes.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?