DELL
DELL 0KCVF5 4TB 3.5" SAS 7.2K 12Gb/s internal hard drive
A 4 TB enterprise hard drive with a 12 Gb/s SAS interface, 7200 RPM speed, and 3.5-inch form factor for high-capacity storage arrays
- PackagingBare Drive
- InterfaceSAS 12Gb/s
- Capacity4TB
- RPM7200 RPM
- Average Latency12Gb/s
- UsageFor Enterprise Storage
- 4TB capacity stores large enterprise datasets
- SAS 12Gb/s interface enables fast data transfers
- 7200 RPM spindle speed delivers responsive performance
- 5-inch form factor fits standard drive bays
- Designed for enterprise storage workloads
Enterprise SAS Drive
The Dell 0KCVF5 is a 4TB 3.5-inch hard drive built for enterprise storage arrays and servers that require a SAS 12Gb/s interface. It suits IT teams expanding capacity in compatible Dell PowerEdge or PowerVault chassis where 7200 RPM spindle speed meets workload demands.
Bare Drive Delivery
The unit ships as a bare drive without a carrier tray, cables or mounting screws, so integrators must supply the correct hot-plug caddy for their specific chassis. No management software or firmware utilities are bundled, leaving configuration entirely to the host controller or RAID adapter.
3.5-Inch SAS Build
A standard 3.5-inch form factor fits conventional enterprise drive bays, while the SAS 12Gb/s connector provides dual-port redundancy for path failover. The 7.2K RPM mechanical design targets sequential throughput and sustained write workloads rather than low-latency transaction processing.
Kohokohdat
- 4TB capacity stores large enterprise datasets
- SAS 12Gb/s interface enables fast data transfers
- 7200 RPM spindle speed delivers responsive performance
- 5-inch form factor fits standard drive bays
- Designed for enterprise storage workloads
Tekniset tiedot
| Brand | Dell |
|---|---|
| Model | 0KCVF5 |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 4TB |
| RPM | 7200 RPM |
| Average Latency | 12Gb/s |
| Usage | For Enterprise Storage |
| Form Factor | 3.5" |
Kysymyksiä tästä tuotteesta
How often will the 7200 RPM bearings need replacement in the 0KCVF5?
The 7200 RPM drive has no user-serviceable bearings; it runs until the unit is retired.
What limits sustained throughput on the SAS 12Gb/s interface?
The 7.2K spindle speed caps sequential transfer before the 12Gb/s link saturates.
How much heat and noise does the 3.5" 7200 RPM mechanism generate when the 0KCVF5 runs all day?
A 3.5" 7200 RPM drive produces audible seek noise and measurable warmth under continuous operation.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
