Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL 2000W 80 Plus Platinum Power Supply XYK93

SKU CH-5KHJ-HN5X6

A 2000W 80 Plus Platinum server power supply for Dell PowerEdge C4130, R530, R630, R730, R830, R840, R930, R940, FX2 and T640 systems with hot-swap redundancy and 94% typical efficiency

  • Compatible ManufacturerFor Dell
  • Compatible ModelsFor For Dell PowerEdge C4130, R530, R630, R730, R830, R840,
  • Dimensions(L x W x H): 3.5" x 5.9" x 1.6"
  • Weight2.2 lbs
  • 94% typical efficiency at 80 Plus Platinum level lowers energy costs
  • 2000W high-density output supports demanding server configurations
  • Hot-swappable redundancy enables replacement without server shutdown
  • Advanced thermal control adjusts fan speed to load
  • Validated compatibility across PowerEdge C4130, R530, R630, R730, R830, R840, R930, R940, FX2, T640

Dell PowerEdge 2000W Platinum PSU

This 2000 watt power supply unit is built for Dell PowerEdge rack servers including the C4130, R530, R630, R730, R830, R840, R930, R940, FX2 and T640. It delivers high-density output with 80 Plus Platinum certification for data-centre and enterprise workloads.

Hot-swap installation in compatible chassis

The unit slides into the server's redundant power bay and locks with the integrated latch, allowing replacement without shutting down the host. Installers must verify the bay is free of debris and that the latch fully engages; incomplete seating is the most common cause of a failed power-on.

Check server model and bay availability

Confirm the target system appears in the compatible model list and that a redundant power bay is present and functional. The PSU measures 3.5 by 5.9 by 1.6 inches and weighs 2.2 lbs, so the chassis must accept this form factor. Ensure the site voltage falls within the 100 to 240 volt auto-sensing range.

Kohokohdat

  • 94% typical efficiency at 80 Plus Platinum level lowers energy costs
  • 2000W high-density output supports demanding server configurations
  • Hot-swappable redundancy enables replacement without server shutdown
  • Advanced thermal control adjusts fan speed to load
  • Validated compatibility across PowerEdge C4130, R530, R630, R730, R830, R840, R930, R940, FX2, T640

Tekniset tiedot

BrandDell
Part NumberXYK93
Compatible ManufacturerFor Dell
Compatible ModelsFor For Dell PowerEdge C4130, R530, R630, R730, R830, R840, R930, R940, FX2, T640
Dimensions(L x W x H): 3.5" x 5.9" x 1.6"
Weight2.2 lbs

Kysymyksiä tästä tuotteesta

How can I verify the 2000W 80 Plus Platinum PSU is operating correctly after installing it in my PowerEdge R630?

The server management console will report the PSU as present and healthy, show input voltage within the 100-240V range, and confirm the unit is sharing load with any redundant supply.

What comes in the box with the Dell XYK93 power supply and what must I source separately?

The package contains the 2000W hot-swap PSU module only; mounting rails, power cables and any rack hardware are not included and must be obtained separately.

Which Dell PowerEdge models are confirmed compatible with this 2000W Platinum unit?

This XYK93 supply is validated for PowerEdge C4130, R530, R630, R730, R830, R840, R930, R940, FX2 and T640 servers.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.