Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL 300Gb 15K SAS 3.5" internal hard drive F617n

SKU CH-KMG6-1N8SP

A 3.5 inch mechanical hard disk delivering 300 Gb capacity with 15K rpm speed and a 6 Gb/s SAS interface

  • 300 Gb capacity stores critical data
  • 15 K RPM spindle speeds up access
  • 6 Gb/s SAS interface moves files fast
  • 16 MB cache smooths burst workloads
  • 5 inch form factor fits standard bays

Dell F617n 300Gb 15K SAS Drive

This Dell F617n is a 3.5 inch mechanical hard drive with a 300Gb capacity and a 15K spindle speed. It connects through a 6Gb/s Sas interface and includes a 16Mb cache buffer. The unit weighs 2.49 pounds and measures 5.4 by 3.1 by 0.6 inches.

Suits Servers Needing Fast 300Gb Storage

This drive fits servers or workstations that require a 300Gb 15K Sas disk for primary storage or array rebuilds. Buyers who need more capacity than 300Gb should look at larger drives. Systems without a Sas backplane or controller cannot use this drive.

300Gb Capacity At 15K RPM Over Sas

The single specification that decides fit is the 300Gb capacity delivered at 15K rpm over a Sas interface. Verify that your chassis accepts a 3.5 inch form factor and that your controller supports 6Gb/s Sas operation before purchase.

Kohokohdat

  • 300 Gb capacity stores critical data
  • 15 K RPM spindle speeds up access
  • 6 Gb/s SAS interface moves files fast
  • 16 MB cache smooths burst workloads
  • 5 inch form factor fits standard bays

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Will this 3.5-inch SAS drive work in my older server that only has 3 Gb/s SAS backplanes?

The drive uses a 6 Gb/s SAS interface and will negotiate down to 3 Gb/s on older backplanes, so it will function at the slower speed.

How can I verify the 15 K rpm spindle is running correctly after installation?

Listen for the characteristic high-pitched whine of a 15 K rpm motor and check SMART data for a stable rotational speed reading.

Does the F617n come with a mounting bracket or SAS cable, or must I source them separately?

The drive is supplied as a bare 3.5-inch mechanism weighing 2.49 pounds; brackets and cables are not included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.