Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL 400-AKIH 6TB 3.5" SAS 7200 RPM internal hard drive

SKU CH-D636-Z3AZ5

A 6 TB internal hard drive with a 12 Gb/s SAS interface, 7200 RPM spindle speed and hot-swap support in a 3.5 inch form factor

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity6TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • Form Factor3.5"
  • 6 TB capacity stores large data sets
  • SAS 12 Gb/s interface moves data quickly
  • 7,200 RPM spindle speed supports responsive access
  • 5-inch form factor fits standard drive bays
  • Hot-pluggable design enables drive swaps without shutdown

Dell 400-AKIH 6TB SAS drive

This Dell 400-AKIH is a 6TB internal hard drive built for desktop and server storage. It spins at 7200 RPM and connects through a SAS 12Gb/s interface in a 3.5" form factor. The drive arrives as a bare unit without cables or brackets.

Check SAS controller and hot-swap bay

Verify that your system has a SAS controller or backplane supporting 12Gb/s speeds before ordering. The drive is hot-pluggable, so it requires a compatible hot-swap bay or cage for that feature. Ensure the chassis accepts 3.5" drives and supplies the correct power connector.

Suits capacity-focused arrays; not for boot speed

This drive suits builders expanding storage arrays, NAS units or servers where high capacity and SAS reliability matter. It is not intended for users who need the low latency of solid-state media for operating-system boots or heavy random workloads. Buyers wanting silent desktop operation should also consider alternatives.

Kohokohdat

  • 6 TB capacity stores large data sets
  • SAS 12 Gb/s interface moves data quickly
  • 7,200 RPM spindle speed supports responsive access
  • 5-inch form factor fits standard drive bays
  • Hot-pluggable design enables drive swaps without shutdown

Tekniset tiedot

BrandDell
Model400-AKIH
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity6TB
RPM7200 RPM
Average Latency12Gb/s
Form Factor3.5"

Kysymyksiä tästä tuotteesta

Does the 400-AKIH ship with a mounting bracket or cables, or is it a bare 3.5" SAS drive?

It is supplied as a bare 3.5" drive only; brackets, screws and SAS cables must be sourced separately.

The listing shows a single 6 TB 7200 RPM model — are there other capacity or speed variants under the same part number?

Part number 400-AKIH identifies only this 6 TB 7200 RPM configuration; different capacities carry different Dell part numbers.

What does the 12 Gb/s SAS interface deliver for a 7.2K spindle in a typical server backplane?

The 12 Gb/s SAS link provides full bus bandwidth for the 7200 RPM mechanism, supporting hot-swap operation in compatible Dell chassis.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.