Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small silver 2.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-ALWC 300GB 2.5" SAS 10000 RPM internal hard drive

SKU CH-X2FZ-XM204

A 300 GB 2.5 inch SAS hard drive spinning at 10000 RPM with a 12 Gb/s transfer rate, hot-swap tray and Dell part number 400-ALWC

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity300GB
  • RPM10000 RPM
  • Average Latency3Gb/s
  • Form Factor2.5"
  • 10,000 RPM spindle speed for fast data access
  • SAS 12Gb/s interface enables high-throughput transfers
  • 5-inch form factor fits dense server bays
  • 300GB capacity stores critical workloads
  • Hot-swap tray allows drive replacement without downtime

Dell 400-ALWC 300GB SAS Drive

This Dell 400-ALWC is a 300GB internal hard drive built for servers and storage arrays that require a 2.5 inch SAS interface. It spins at 10000 RPM and is sold as a new bare drive with a hot-swap tray. The unit suits IT teams replacing a failed drive in a compatible Dell enclosure or expanding existing capacity.

SAS 12Gb/s Interface

The decisive specification is the SAS interface operating at 12Gb/s transfer rate; the system backplane and controller must support this exact speed for the drive to function correctly. A 3Gb/s or 6Gb/s SAS connection will not provide the rated throughput and may prevent the drive from being recognised. Buyers without a 12Gb/s SAS host should not purchase this model.

Hot-Swap Tray Included

The drive ships with a hot-swap tray that allows insertion and removal while the server remains powered on. This hardware eliminates the need for a separate caddy and reduces downtime during maintenance or upgrades. No additional software, cables or mounting screws are supplied in the bare-drive packaging.

Kohokohdat

  • 10,000 RPM spindle speed for fast data access
  • SAS 12Gb/s interface enables high-throughput transfers
  • 5-inch form factor fits dense server bays
  • 300GB capacity stores critical workloads
  • Hot-swap tray allows drive replacement without downtime

Tekniset tiedot

BrandDell
Model400-ALWC
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity300GB
RPM10000 RPM
Average Latency3Gb/s
Form Factor2.5"

Kysymyksiä tästä tuotteesta

How does the 10000 RPM speed translate to real-world performance in a server?

The 10000 RPM spindle reduces average latency and sustains higher sequential throughput than slower drives, benefiting transactional workloads and database logs in a Dell server.

What does the SAS 12Gb/s interface actually cap at in practice?

The SAS 12Gb/s interface supports up to 12Gb/s per lane; actual throughput depends on the controller and backplane, but the drive will not exceed that electrical limit.

Will this 2.5" drive fit a standard Dell hot-swap tray?

Yes, the 2.5" form factor and hot-swap tray design match Dell 2.5" SAS bays, allowing tool-less insertion into compatible PowerEdge or Precision chassis.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.