Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL 400-ASMP 1.8TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-HXE9-DT0X3

A 1.8 TB SAS hard drive with 10 000 RPM speed, 12 Gb/s transfer rate and hot-swap tray for 2.5 inch bays

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • High-capacity 1.8TB storage for demanding workloads
  • 10000 RPM spindle speed accelerates data access
  • SAS 12Gb/s interface delivers fast transfer rates
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive replacement without downtime

Dell 400-ASMP 1.8TB SAS Drive

This Dell 400-ASMP is a 1.8TB internal hard drive built for desktop and server bays that accept a 2.5" SAS connection. It spins at 10000 RPM and supports a 12Gb/s transfer rate for rapid data access. The bare drive ships without a tray and is sold new.

Who this suits and who it does not

It suits administrators expanding Dell arrays or replacing a failed unit in a hot-swap chassis that natively speaks SAS. Builders whose systems lack a SAS controller or backplane cannot install this disk. Buyers who need a larger single volume should look at higher-capacity models.

The spec that decides fit

The 12Gb/s SAS interface is the single specification that determines whether this drive works in your hardware; the host must provide a matching SAS port and backplane support.

Kohokohdat

  • High-capacity 1.8TB storage for demanding workloads
  • 10000 RPM spindle speed accelerates data access
  • SAS 12Gb/s interface delivers fast transfer rates
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive replacement without downtime

Tekniset tiedot

BrandDell
Model400-ASMP
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency6Gb/s
Form Factor2.5"

Kysymyksiä tästä tuotteesta

Should I pick the 1.8TB 10000 RPM SAS drive or a lower-capacity model?

The 1.8TB capacity gives the most storage per bay; choose it when you need maximum space in a 2.5" slot, otherwise a smaller drive saves cost.

What does the 12Gb/s transfer rate deliver in a live server?

The 12Gb/s SAS link moves data up to that ceiling; real throughput depends on the controller and workload but will not exceed 12Gb/s.

Does the SAS 6Gb/s interface limit the 12Gb/s headline speed?

The drive negotiates at 12Gb/s on a 12Gb/s backplane; on a 6Gb/s backplane it falls back to 6Gb/s, so the interface caps the maximum.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.