Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL 469-4244 PowerConnect 2824 24-port 10/100/1000 network switch

SKU CH-PXXC-1XV1Y MPN 469-4244

A managed Layer 2 rackmount switch with 24 Gigabit RJ45 ports and two SFP uplinks for small-business networks

  • FormatRackmount
  • Standards802.3 802.3u 802.3ab 802.1Q 802.3ad 802.1p
  • Network Management TypeManaged
  • Uplink Ports2
  • Uplink InterfaceSFP
  • Primary Ports24 x RJ45 + 2 x SFP
  • Managed Layer 2 switch with 24 Gigabit RJ45 ports
  • Two SFP uplink ports for fibre uplinks at 10/100/1000 Mbps
  • 8K MAC address table supports growing device counts
  • 9000-byte jumbo frames boost large-transfer throughput
  • 65" high rack-mount form factor saves rack space

Dell PowerConnect 2824 24-Port Switch

The Dell PowerConnect 2824 is a managed Layer 2 network switch designed for rackmount deployment. It provides twenty-four RJ45 ports operating at 10/100/1000 Mbps and two SFP uplink interfaces. The switch supports an 8K MAC address table and 9000-byte jumbo frames for efficient data handling.

Suited for Managed Layer 2 Networks

This switch fits environments needing VLAN segmentation, link aggregation via 802.3ad, and traffic prioritisation with 802.1p on a managed Layer 2 platform. It is not suitable for networks requiring Power over Ethernet, Layer 3 routing, or stacking capability. Buyers needing PoE or advanced routing should consider other hardware.

24 RJ45 Ports with Dual SFP Uplinks

The primary specification is the combination of twenty-four Gigabit RJ45 ports and two SFP uplink ports in a 1U rackmount form factor. This port density and uplink flexibility determine whether the unit matches the physical and logical topology of the intended network segment.

Kohokohdat

  • Managed Layer 2 switch with 24 Gigabit RJ45 ports
  • Two SFP uplink ports for fibre uplinks at 10/100/1000 Mbps
  • 8K MAC address table supports growing device counts
  • 9000-byte jumbo frames boost large-transfer throughput
  • 65" high rack-mount form factor saves rack space

Tekniset tiedot

BrandDell
SeriesPowerConnect 2800
Model2824
FormatRackmount
Standards802.3
802.3u
802.3ab
802.1Q
802.3ad
802.1p
Network Management TypeManaged
Uplink Ports2
Uplink InterfaceSFP
Primary Ports24 x RJ45 + 2 x SFP
Primary Port Speed10/100/1000Mbps
MAC Address Table8K
VLAN SupportYes
Jumbo Frames9000 bytes
Uplink Speed10/100/1000 Mbps
PoENo
StackableNo
SNMPYes
QoSNo
LayerLayer 2 Only
Dimensions1.65" x 13.00" x 9.10" (H x W x D)
Package ContentsPowerConnect 2824 Ethernet Switch
1U Rack-mounting Kit
Lähetyspaino3.70 kg
Pakkauksen mitat413 × 305 × 107 mm

Kysymyksiä tästä tuotteesta

How many devices can the 8K MAC address table track before it fills under sustained traffic?

The switch holds up to 8K MAC entries, so the table itself is the first limit reached when thousands of active endpoints are connected.

What is the power draw and acoustic profile when all 24 RJ45 ports run at 1000 Mbps continuously?

The 2824 has no PoE and no fan specifications in the data, so its steady-state heat and noise are determined by the base switch ASIC and passive cooling only.

Which SFP transceivers must I already own to use the two uplink ports?

The uplinks accept standard SFP modules at 10, 100 or 1000 Mbps; any compatible SFP you already have will work.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.