DELL
DELL 7RCGV 2TB 7.2K SAS 3.5" 12Gb/s internal hard drive
A 2 TB SAS hard drive spinning at 7200 RPM in a 3.5-inch form factor with a 12 Gb/s interface
- InterfaceSAS 12Gb/s
- Capacity2TB
- RPM7200 RPM
- Form Factor3.5"
- 2 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive throughput
- SAS 12 Gb/s interface enables fast host transfers
- 5 inch form factor fits standard drive bays
- New condition ensures full manufacturer specification
Capacity and interface
This is a 2TB 3.5-inch internal hard drive with a SAS 12Gb/s interface and a 7200 RPM spindle speed. It is built for desktop chassis and server bays that accept 3.5-inch SAS drives. The drive arrives new and is suited for bulk storage workloads that benefit from the SAS protocol.
Suited for SAS bays, not SATA-only systems
The drive fits systems with a 12Gb/s SAS backplane or controller and a standard 3.5-inch drive bay. It will not work in SATA-only controllers or enclosures that lack SAS support. Buyers who need a SATA interface or a 2.5-inch form factor should look at a different part.
12Gb/s SAS interface decides compatibility
The single specification that determines fit is the SAS 12Gb/s interface. Your host bus adapter, RAID card or backplane must support 12Gb/s SAS signalling for the drive to operate. Without that interface the drive cannot be used.
Kohokohdat
- 2 TB capacity stores large datasets
- 7200 RPM spindle speed delivers responsive throughput
- SAS 12 Gb/s interface enables fast host transfers
- 5 inch form factor fits standard drive bays
- New condition ensures full manufacturer specification
Tekniset tiedot
| Interface | SAS 12Gb/s |
|---|---|
| Capacity | 2TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Kysymyksiä tästä tuotteesta
How do I install the DELL 7RCGV 3.5" SAS drive in a desktop, and what step is often missed?
Mount the 3.5" drive in a standard bay, connect the SAS data cable to a 12Gb/s SAS controller and attach a SATA power connector; the step often missed is confirming the controller supports SAS at 12Gb/s rather than only SATA.
What maintenance or replacement will the DELL 7RCGV 2TB 7200 RPM drive need later?
No scheduled maintenance is required; replacement is needed only if the drive fails or capacity runs out, at which point another 3.5" SAS drive with the same 12Gb/s interface can be swapped in.
What limit appears first on the DELL 7RCGV 12Gb/s SAS drive during sustained use?
The 7200 RPM rotational speed limits sustained transfer rates before the 12Gb/s SAS interface saturates.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
