Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL 8 TB 3.5" SAS 12Gb/s 7.2K 512E internal hard drive

SKU CH-9Y03-TSYQP

8 TB 3.5" SAS 12Gb/s 7.2K 512E internal hard drive for desktop storage

  • 8 TB capacity stores large datasets
  • 12 Gb/s SAS interface enables fast data transfer
  • 2 K RPM spindle speed supports steady throughput
  • 512E sector format ensures broad system compatibility
  • 5-inch hot-plug design allows drive swaps without downtime

Dell 8 TB SAS 12Gb/s drive

This Dell 8 TB hard drive uses a 3.5 inch form factor and a SAS 12Gb/s interface. It spins at 7.2K RPM and employs a 512E sector format. The unit is supplied as a customer kit with hot-plug capability.

Suitable for bulk storage in compatible SAS bays

This drive fits servers or storage arrays that accept 3.5 inch SAS hot-plug devices and need high-capacity sequential throughput. Buyers whose chassis only support 2.5 inch bays or a different physical interface cannot use this unit.

SAS 12Gb/s interface

The single specification that decides compatibility is the SAS 12Gb/s interface. The system backplane and controller must support this exact protocol for the drive to function.

Kohokohdat

  • 8 TB capacity stores large datasets
  • 12 Gb/s SAS interface enables fast data transfer
  • 2 K RPM spindle speed supports steady throughput
  • 512E sector format ensures broad system compatibility
  • 5-inch hot-plug design allows drive swaps without downtime

Tekniset tiedot

BrandDell

Kysymyksiä tästä tuotteesta

What practical throughput does the SAS 12Gb/s interface cap at?

The SAS 12Gb/s link supports up to 12 Gb/s signalling; real-world sustained transfer will be limited by the 7.2K rotational speed and 512E formatting.

What drive bay and mounting style does the 3.5-inch hot-plug kit require?

It fits a standard 3.5-inch hot-plug bay with the carrier supplied in the customer kit; no separate screws or rails are needed.

How is the drive installed, and which step is commonly missed?

Slide the carrier into the hot-plug bay until the latch clicks; the step often missed is verifying the SAS connector is fully seated before locking the lever.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.