DELL
DELL 9CF26 500GB 7200 RPM SATA 3.5" 16MB internal hard drive
A 500 GB, 7200 RPM SATA internal hard drive with 16 MB cache in a 3.5 inch form factor, suited for server workloads
- PackagingBare Drive
- InterfaceSATA
- Capacity500GB
- RPM7200 RPM
- Cache16MB
- Average Latency6Gb/s
- 500 GB storage for desktop workloads
- 7200 RPM spindle speed for responsive data access
- 16 MB cache to smooth burst transfers
- SATA 6 Gb/s interface for broad motherboard compatibility
- 5 inch form factor fits standard drive bays
Dell 9CF26 500GB SATA Hard Drive
The Dell 9CF26 is a 500GB 3.5-inch internal hard drive spinning at 7200 RPM with a 16MB cache. It uses a SATA 6Gb/s interface and a 512e disk format. This new drive is designed for desktop workstations and server environments.
Interface and Form Factor
The drive connects via a standard SATA interface operating at 6Gb/s and fits a 3.5-inch drive bay. Compatibility is confirmed for the Precision 7910 Tower Workstation. Buyers needing a different physical size or a PCIe interface should look elsewhere.
Bare Drive Packaging
The product ships as a bare drive without cables, brackets or mounting screws. Retail or OEM packaging may vary depending on supply. Installation requires the user to provide their own SATA data cable and power connection.
Kohokohdat
- 500 GB storage for desktop workloads
- 7200 RPM spindle speed for responsive data access
- 16 MB cache to smooth burst transfers
- SATA 6 Gb/s interface for broad motherboard compatibility
- 5 inch form factor fits standard drive bays
Tekniset tiedot
| Brand | Dell |
|---|---|
| Model | 9CF26 |
| Packaging | Bare Drive |
| Interface | SATA |
| Capacity | 500GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Latency | 6Gb/s |
| Usage | Ideal for Servers |
| Form Factor | 3.5" |
Kysymyksiä tästä tuotteesta
What does the 7200 RPM spindle speed mean once the drive is installed in a workstation?
The 7200 RPM spindle speed gives faster sequential read and write performance than slower desktop drives, reducing load times for large files on a Precision 7910 Tower Workstation.
What does the SATA/600 interface standard cap in practice?
The SATA/600 interface caps the maximum theoretical transfer rate at 6 Gb/s, so sustained throughput will not exceed that limit regardless of the drive’s internal speed.
What physical space does the 3.5" form factor need to fit or mount?
The 3.5" form factor requires a standard 3.5-inch internal drive bay and uses the regular SATA data and power connectors found in desktop workstations.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
