BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
DELL
Replacement system board with integrated Intel Pentium 4405U 2.1GHz processor for Inspiron 13 5368 and 15 5568 2-in-1 laptops
This genuine Dell system board includes an Intel Pentium 4405U dual-core processor fixed at 2.1 GHz. It is built as a direct replacement for the Inspiron 13 5368 and Inspiron 15 5568 2-in-1 laptops. Buyers who need a drop-in board for those specific models can install it without searching for a separate CPU.
The board arrives as a factory-original Dell part with the processor already soldered in place, so there is no socket to align or thermal paste to apply. Its mounting points and connector layout match the 13 and 15 inch 2-in-1 chassis exactly, meaning the existing heatsink, display cable and I/O ports line up without modification. Builders who want to upgrade the processor or use a different cooler cannot do so with this board.
Compatibility is confined to the Inspiron 13 5368 and Inspiron 15 5568 2-in-1 systems; the board will not fit other Dell lines or standard desktop cases. The on-board Pentium 4405U sets a firm performance ceiling, so the machine will remain at dual-core 2.1 GHz after the swap. Anyone needing more cores, higher clocks or a different platform must look beyond this part.
| Brand | DELL |
|---|
The Intel Pentium 4405U CPU is soldered directly onto the C1HX7 board, so there is no removable socket interface to consider.
This board is built to the exact dimensions of the original system board for the Inspiron 13 5368 and 15 5568 2-in-1 models, matching the factory mounting points.
Installation requires disassembling the laptop chassis, transferring the heatsink onto the on-board Pentium 4405U with fresh thermal paste, and reconnecting all ribbon cables; the step most often missed is reapplying thermal compound before refitting the cooler.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?