Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL DNTWD 250GB 7.2K SATA 2.5 internal hard drive 512n

SKU CH-9B34-AQHCR

2.5-inch SATA hard drive with 250 GB capacity and 7.2K RPM for compatible Dell PowerEdge servers

  • Capacity50GB
  • InterfaceSATA
  • 250 GB capacity stores large datasets
  • 2K RPM spindle delivers responsive throughput
  • SATA 6 Gbps interface enables fast data transfer
  • 512n sector format ensures broad compatibility
  • Validated for Dell PowerEdge C6320, FC630, FC830, M630, M830, R230, R330, R430, R530, R630, R730, R730XD, R830, R930, T130, T430, T630

Dell 250GB 7.2K SATA 2.5 HDD

The Dell DNTWD is a 250GB 7.2K RPM SATA hard drive in a 2.5 inch form factor. It uses a 512n sector format and operates at 6Gbps. The drive is built for Dell PowerEdge servers including the R230, R330, R430, R530, R630, R730, R730XD, R830, R930, T130, T430 and T630 models.

Upgrade from smaller capacity drives

This drive replaces lower capacity SATA drives in compatible PowerEdge systems. The jump is worth it when you need more storage space for operating systems, applications or data on supported 13th generation servers. It fits the same 2.5 inch bays and uses the same SATA interface.

SATA 6Gbps interface limit

The SATA 6Gbps interface caps the maximum transfer rate of this mechanical drive. Sequential throughput will not exceed the bus limit. Random I/O performance is constrained by the 7.2K RPM rotational speed. The 512n sector format ensures compatibility with older operating systems and controllers that do not support 4Kn sectors.

Kohokohdat

  • 250 GB capacity stores large datasets
  • 2K RPM spindle delivers responsive throughput
  • SATA 6 Gbps interface enables fast data transfer
  • 512n sector format ensures broad compatibility
  • Validated for Dell PowerEdge C6320, FC630, FC830, M630, M830, R230, R330, R430, R530, R630, R730, R730XD, R830, R930, T130, T430, T630

Tekniset tiedot

BrandDell
SeriesDNTWD
ModelDNTWD, ST9250610NS
Capacity50GB
InterfaceSATA

Kysymyksiä tästä tuotteesta

Will the 2.5 inch form factor fit the drive bays in a PowerEdge R630?

Yes, the 2.5 inch drive is designed for the 2.5 inch bays used in the PowerEdge R630 and other listed servers.

Does installation require a specific Dell drive carrier or caddy for the PowerEdge R730?

The drive itself is a bare 2.5 inch unit; you must supply the correct Dell hot-plug carrier for the R730 chassis, which is the step often missed.

Is the 512n sector format compatible with the RAID controller in a PowerEdge R430?

The 512 native sector format works with standard RAID controllers in the R430; no advanced format translation is needed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.