Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2.5 inch SAS hard drive with hot-swap tray

DELL

DELL GP3FR 1.8TB 2.5" SAS 10000 RPM 12Gb/s internal hard drive

SKU CH-WZSR-P249P

A 1.8TB 2.5-inch SAS hard drive spinning at 10000 RPM with a 12Gb/s transfer rate, supporting hot-swap operation

  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Form Factor2.5"
  • High-capacity 1.8 TB storage for demanding workloads
  • Fast 10 000 RPM spindle speeds up data access
  • SAS 12 Gb/s interface delivers high-throughput transfers
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive changes without downtime

Dell GP3FR 1.8TB SAS Drive

This new Dell GP3FR is a 1.8TB 2.5-inch internal hard drive with a SAS 12Gb/s interface spinning at 10000 RPM. It is built for enterprise servers and storage arrays that require high-speed block access and hot-swap capability. The drive arrives in retail or OEM packaging depending on stock.

Suits SAS 12Gb/s bays needing 10K speed

Administrators expanding Dell PowerEdge or compatible platforms with 2.5-inch hot-swap bays will find the correct part number and performance profile here. Buyers whose systems only accept 3.5-inch carriers or lack a 12Gb/s SAS backplane should look at something else. The tray type is specified as hot-swap, so fixed-mount enclosures are not supported.

SAS 12Gb/s interface at 10000 RPM

The single specification that decides fit is the 12Gb/s SAS interface combined with 10000 RPM spindle speed. Controllers or backplanes limited to 6 Gb/s will operate at the lower rate. Verify the host bus adapter and backplane generation match this transfer rate before purchase.

Kohokohdat

  • High-capacity 1.8 TB storage for demanding workloads
  • Fast 10 000 RPM spindle speeds up data access
  • SAS 12 Gb/s interface delivers high-throughput transfers
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive changes without downtime

Tekniset tiedot

BrandDell
ModelGP3FR
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Form Factor2.5"

Kysymyksiä tästä tuotteesta

Will the 12Gb/s SAS drive negotiate down to 6Gb/s on my older HBA?

Yes, the SAS 12Gb/s interface is backward compatible and will link at 6Gb/s or 3Gb/s if the host controller only supports those speeds.

How can I confirm the 10000 RPM spindle is running after installation?

Listen for the characteristic high-pitched whine of a 10K drive and verify the SMART data reports 10000 RPM in your RAID utility or OS disk tool.

Does the hot-swap tray ship with the 2.5" drive or must I order it separately?

The drive includes the Dell hot-swap tray (Tray Type: HS) so it can be inserted directly into a compatible 2.5" bay without extra parts.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.