Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black plastic caddy tray for Dell Latitude E5410 E5510 laptops

DELL

DELL Latitude E5410 E5510 HDD Caddy Tray 4R5RH 04R5RH

SKU CH-MGZW-G6ZYP

Adds a second 2.5" SATA drive to Dell Latitude E5410 or E5510 by replacing the optical bay

  • Compatible ManufacturerFor Dell
  • Compatible ModelsFor Dell Latitude E5410, Latitude E5510
  • Dimensions5.12 x 4.33 x 0.39 inches
  • Weight0.11
  • Adds secondary storage by replacing optical drive with 2.5" SATA drive
  • Fits Dell Latitude E5410 and E5510 models exactly
  • Supports 7 mm and 9.5 mm drive heights
  • Pre-installed SATA connector enables tool-free drive installation
  • Weighs 0.11 lb with compact 5.12 x 4.33 x 0.39 in dimensions

Compatible Dell Latitude models

This caddy tray is built for Dell Latitude E5410 and E5510 laptops. It replaces the internal optical drive bay with a secure slot for a secondary 2.5" SATA drive. The part numbers 4R5RH and 04R5RH confirm exact OEM fitment. Buyers with other Dell models or non-Dell laptops cannot use this adapter.

Verify drive height and interface

Check that your intended drive is a 2.5" SATA HDD or SSD with a height of either 7mm or 9.5mm. The tray does not accept drives thicker than 9.5mm or drives using interfaces other than SATA. Confirm your laptop currently has an optical drive installed in the modular bay before ordering.

Adds secondary storage via optical bay

The tray slides into the existing optical drive opening and connects through the pre-installed SATA interface. Metal retention clips and screw mounts hold the drive firmly without vibration. This frees the primary drive bay for the OS while adding up to a second 2.5" SATA drive for data or backups.

Kohokohdat

  • Adds secondary storage by replacing optical drive with 2.5" SATA drive
  • Fits Dell Latitude E5410 and E5510 models exactly
  • Supports 7 mm and 9.5 mm drive heights
  • Pre-installed SATA connector enables tool-free drive installation
  • Weighs 0.11 lb with compact 5.12 x 4.33 x 0.39 in dimensions

Tekniset tiedot

BrandDell
Part Number04R5RH
Compatible ManufacturerFor Dell
Compatible ModelsFor Dell Latitude E5410, Latitude E5510
Dimensions5.12 x 4.33 x 0.39 inches
Weight0.11

Kysymyksiä tästä tuotteesta

Does the Dell 04R5RH caddy tray include the 2.5" SATA drive or only the bracket and screws?

The tray ships with the metal bracket, pre-installed SATA connector and mounting screws; any 2.5" SATA HDD or SSD must be purchased separately.

My Latitude is an E5410 — will the 04R5RH fit or do I need a different part number?

The 04R5RH is the exact OEM part for both Latitude E5410 and E5510, so it fits your E5410 optical bay without modification.

After installing a 9.5 mm drive in the 04R5RH, does the laptop still recognise it as a standard SATA volume?

Yes — the integrated SATA/power interface presents the drive to the system exactly like the primary bay, so the OS sees a normal SATA volume.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.