Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular 2.5 inch enterprise SSD with label showing PM1643a 3.84TB SAS 12Gb/s

DELL

DELL PM1643a MZ-ILT3T8C 3.84TB SAS 12 2.5in enterprise SSD

SKU CH-3FS0-AV26J

3.84 TB 2.5-inch enterprise SSD delivering 2100 MB/s read and 2000 MB/s write over SAS 12 with 1 DWPD endurance and power-loss protection

  • Form Factor2.5"
  • Capacity3.84TB
  • InterfaceSAS 12Gb/s
  • Sustained Sequential Read2100 MB/s
  • Sustained Sequential Write2000 MB/s
  • Endurance1 DWPD
  • 84 TB capacity supports large enterprise datasets
  • 2100 MB/s sequential read accelerates data-intensive workloads
  • 2000 MB/s sequential write sustains high-throughput operations
  • 1 DWPD endurance rating ensures reliable read-intensive performance
  • 2,000,000 hours MTBF delivers long-term drive reliability

Capacity and interface

This 3.84TB enterprise SSD uses a 12Gb/s SAS interface in a 2.5in form factor. It is built for read-intensive workloads in servers and storage arrays. Sequential speeds reach 2100 MB/s read and 2000 MB/s write.

Suited for read-heavy arrays.

The drive is rated at 1 DWPD, making it a match for backup, archiving and analytics where reads dominate. It is not designed for workloads that need higher write endurance. The SAS interface is not compatible with standard desktop PCs.

Endurance rating

At 1 DWPD the drive can write its full capacity once per day over the warranty period. This single figure determines whether the SSD fits a read-intensive deployment or falls short for mixed or write-heavy applications.

Kohokohdat

  • 84 TB capacity supports large enterprise datasets
  • 2100 MB/s sequential read accelerates data-intensive workloads
  • 2000 MB/s sequential write sustains high-throughput operations
  • 1 DWPD endurance rating ensures reliable read-intensive performance
  • 2,000,000 hours MTBF delivers long-term drive reliability

Tekniset tiedot

BrandDELL/SAMSUNG
SeriesPM1643a
ModelMZ-ILT3T8C
Part NumberMZILT3T8HBLSAD4
Form Factor2.5"
Capacity3.84TB
InterfaceSAS 12Gb/s
Sustained Sequential Read2100 MB/s
Sustained Sequential Write2000 MB/s
Endurance1 DWPD
MTBF2,000,000 hours
FeaturesPower Loss Protection, Error Correcting Code, Hot-Swap, Dual Port

Kysymyksiä tästä tuotteesta

How do I install the 2.5in SAS 12Gb/s drive in a hot-swap bay, and what step is often missed?

Slide the drive into the hot-swap tray until the dual-port SAS connector seats firmly; the step most people miss is verifying the carrier latch clicks so the dual-port link stays secure under vibration.

What maintenance or replacement will the 3.84TB 1 DWPD SSD need later?

With 1 DWPD endurance and 2,000,000-hour MTBF, the drive itself needs no scheduled maintenance; replacement is only required once the rated write budget is exhausted or a SMART alert flags wear.

What limit appears first during sustained writes on the PM1643a 2000 MB/s sequential write drive?

The 1 DWPD endurance rating is the first hard limit; continuous writes at 2000 MB/s will consume the daily write budget before thermal throttling or the 12Gb/s SAS interface saturates.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.