Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Dell PowerEdge M630 blade server in silver metal finish

DELL

DELL PowerEdge M630 Blade 2x Xeon E5-2630 v4 2.2 GHz 384GB DDR4 2x 1TB SATA

SKU CH-F461-K0KZW

Dual Xeon E5-2630 v4 blade server with 384 GB DDR4 memory and two 1 TB SATA drives in a 2.5-inch form factor

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.2 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon E5-2630 v4 CPUs deliver 20 cores at 2.2 GHz for parallel workloads
  • 384 GB DDR4 ECC registered memory supports large datasets with room to reach 512 GB
  • Two 1 TB SATA 7.2K 2.5" drives provide 2 TB capacity on PERC H330 controller
  • 10 GbE dual-port 562T adapter enables high-throughput network connectivity
  • iDRAC8 Enterprise remote management gives full out-of-band control and monitoring

Blade Server for Virtualisation

The Dell PowerEdge M630 fits into a blade enclosure and provides two Xeon E5-2630 v4 processors running at 2.2 GHz. With 384 GB of DDR4 ECC registered memory installed and a maximum capacity of 512 GB, it targets environments that run many virtual machines or memory-intensive databases. Two 1 TB SATA drives connect through the PERC H330 RAID controller for local storage.

Bundled Controller and Remote Management

The PERC H330 SAS storage controller manages the two 2.5-inch drives and supports RAID levels for redundancy or performance. Integrated iDRAC8 Enterprise enables remote power control, console redirection and firmware updates without physical access to the chassis. A 10 GbE dual-port 562T adapter is also fitted for high-throughput network connectivity.

Enclosure Compatibility and Memory Headroom

Verify that your existing blade enclosure accepts PowerEdge M630 sleds and supplies adequate power and cooling for dual-processor blades. The system has twelve memory slots populated to 384 GB, leaving room for expansion up to 512 GB if workloads grow. Confirm that your RAID requirements match the capabilities of the H330 controller before ordering.

Kohokohdat

  • Dual Xeon E5-2630 v4 CPUs deliver 20 cores at 2.2 GHz for parallel workloads
  • 384 GB DDR4 ECC registered memory supports large datasets with room to reach 512 GB
  • Two 1 TB SATA 7.2K 2.5" drives provide 2 TB capacity on PERC H330 controller
  • 10 GbE dual-port 562T adapter enables high-throughput network connectivity
  • iDRAC8 Enterprise remote management gives full out-of-band control and monitoring

Tekniset tiedot

BrandDELL
SeriesPowerEdge
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.2 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4 SDRAM
Max Memory Capacity512GB
Hard Drive (Installed)2,00
Storage ControllerDell PERC H330 SAS Storage Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 Enterprise
Dimensions22 x 22x 10 in
Weight20

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.