Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver blade server with front drive bays and ventilation slots

DELL

DELL PowerEdge M630 Blade 2x Xeon E5-2660v4 384GB 2x 1.8TB SAS

SKU CH-8BXQ-96EVQ

Dual 14-core Xeon blade server with 384 GB DDR4 and dual 1.8 TB SAS drives

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual 14-core Xeon CPUs at 2.0 GHz power demanding workloads
  • 384 GB DDR4 ECC memory with room to reach 512 GB
  • Two 1.8 TB SAS drives on a PERC H330 controller for fast storage
  • iDRAC8 Enterprise gives full remote server management
  • 10 GbE dual-port adapter handles high-throughput networking

PowerEdge M630 dual-socket blade

The Dell PowerEdge M630 is a two-socket blade server populated with two Intel Xeon E5-2660v4 processors running at 2.0 GHz with 14 cores each. It ships with 384 GB of DDR4 ECC registered memory and two 1.8 TB SAS hard drives managed by a PERC H330 controller. Remote administration is provided by iDRAC8 Enterprise.

Suited for dense compute clusters.

This configuration targets environments that need high core density and large memory capacity within a standard blade footprint. The integrated graphics and lack of discrete accelerator support make it unsuitable for visualisation, rendering or GPU-accelerated analytics. Buyers who need more than two 2.5-inch drives or a different drive interface should look at another platform.

384 GB DDR4 installed, 512 GB maximum

The system arrives with 384 GB of DDR4 memory installed across the available DIMM slots and supports a maximum of 512 GB. This ceiling determines whether the blade can accommodate the dataset size or virtual-machine count required by the deployment.

Kohokohdat

  • Dual 14-core Xeon CPUs at 2.0 GHz power demanding workloads
  • 384 GB DDR4 ECC memory with room to reach 512 GB
  • Two 1.8 TB SAS drives on a PERC H330 controller for fast storage
  • iDRAC8 Enterprise gives full remote server management
  • 10 GbE dual-port adapter handles high-throughput networking

Tekniset tiedot

BrandDELL
SeriesPowerEdge
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4 SDRAM
Max Memory Capacity512GB
Hard Drive (Installed)3,60
Storage ControllerDell PERC H330 SAS Storage Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 Enterprise
Dimensions22 x 22x 10 in
Weight20

Kysymyksiä tästä tuotteesta

Does the blade accept the DDR4 modules I already own for a memory upgrade?

The blade uses DDR4 SDRAM and currently holds 384 GB. The maximum supported capacity is 512 GB, so compatible DDR4 modules can be added up to that limit.

How can I confirm the PERC H330 controller sees both 1.8 TB SAS drives after installation?

During POST the controller BIOS lists each detected drive, and iDRAC8 Enterprise shows both 1.8 TB SAS drives with status OK once the blade is powered on.

Which components ship with the blade and which must be ordered separately?

The blade arrives with two Xeon E5-2660v4 CPUs, 384 GB DDR4 memory, two 1.8 TB SAS drives and the PERC H330 controller. A rail kit is available on request but is not included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.