Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver blade server module with front drive bays and connector edge

DELL

DELL PowerEdge M640 Blade Server 2× Xeon Platinum 8160 2.1 GHz 384GB DDR4 2× 900GB SAS

SKU CH-MF0J-XCKZP

Dual Xeon Platinum 8160 blade server with 384 GB DDR4 memory and two 900 GB SAS drives for dense compute workloads

  • TypeBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.1 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon Platinum 8160 processors provide 24 cores each at 2.1 GHz
  • 384 GB DDR4 ECC registered memory supports large workloads
  • Two 900 GB SAS 2.5" 10K drives offer fast storage
  • PERC H330 RAID controller manages drive redundancy
  • iDRAC9 Enterprise enables remote server management

Target platform

The Dell PowerEdge M640 is a two-socket blade server built around dual Xeon Platinum 8160 processors running at 2.1 GHz. It ships with 384 GB of DDR4 ECC registered memory and a PERC H330 SAS RAID controller managing two 900 GB 10K SAS drives. Remote administration is handled by iDRAC9 Enterprise and a dual-port 10 GbE 562T adapter.

Fit and alternatives

This blade suits dense compute clusters, virtualisation hosts and database nodes that need high core counts and fast SAS storage in a half-height form factor. Buyers who need more than two 2.5-inch drive bays, GPU acceleration or a different storage protocol should look at another platform.

Deciding specification

The installed memory is 384 GB of DDR4 with a maximum capacity of 1 TB across the system. If the workload requires more than 1 TB of RAM this blade cannot meet the requirement.

Kohokohdat

  • Dual Xeon Platinum 8160 processors provide 24 cores each at 2.1 GHz
  • 384 GB DDR4 ECC registered memory supports large workloads
  • Two 900 GB SAS 2.5" 10K drives offer fast storage
  • PERC H330 RAID controller manages drive redundancy
  • iDRAC9 Enterprise enables remote server management

Tekniset tiedot

BrandDELL
SeriesPowerEdge
ModelBlade
TypeBlade
CPU TypeIntel Xeon
CPU Speed2.1 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4 SDRAM
Max Memory Capacity1TB
Hard Drive (Installed)1.800,00
Storage ControllerDell PERC H330 SAS Storage Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementiDRAC9 Enterprise
Dimensions22 x 22x 10 in
Weight20

Kysymyksiä tästä tuotteesta

How do I verify the iDRAC9 Enterprise remote management is active after installation?

Log into the iDRAC web interface using the server's IP address; the dashboard should show both Xeon Platinum 8160 processors at 2.1 GHz, 384 GB DDR4 memory, and the PERC H330 controller with the two 900 GB SAS drives.

Which components are included and which must be sourced separately?

The blade ships with 2x Xeon Platinum 8160 CPUs, 384 GB DDR4 ECC registered RAM, 2x 900 GB 2.5" 10K SAS drives, PERC H330 RAID controller, and a 10 GbE 2-port 562T adapter; a rail kit is available on request.

Which configuration should I choose if I need the maximum supported memory capacity?

This unit has 384 GB installed and supports up to 1 TB; select a configuration that populates the remaining DIMM slots with compatible DDR4 modules to reach the 1 TB limit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.