Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Half-height blade server, silver metal chassis, two 2.5-inch drive bays visible

DELL

DELL PowerEdge M640 blade server 2x Xeon 8260 24-core 16GB DDR4 2x 1.92TB SSD H330 57810S-K iDRAC9 Enterprise

SKU CH-SZ4J-4623Q

Half-height blade server with dual 24-core Xeon Platinum 8260 processors, 16GB DDR4 ECC memory, PERC H330 controller, two 1.92TB SATA SSDs, dual-port 10Gb networking and iDRAC9 Enterprise management

  • TypeBlade
  • Rack HeightBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.40 GHz
  • CPU SocketLGA 3647
  • Number of CPU Cores24-Core Processor

Installed Memory Size 16GB

SSD (Installed) 2 x 1.92TB SATA SSD

  • Two 24-core Xeon Platinum 8260 processors deliver high parallel throughput
  • 16 GB DDR4 registered ECC memory supports reliable multi-tasking
  • Dual 1.92 TB SATA SSDs give fast read access for active datasets
  • PERC H330 controller enables RAID 0/1/5/10/50 for data protection
  • iDRAC9 Enterprise provides remote management and automation

Blade server for virtualization and HPC

The Dell PowerEdge M640 half-height blade fits PowerEdge MX and M1000e chassis and ships with two Intel Xeon Platinum 8260 processors, each running 24 cores at 2.40 GHz with a 3.9 GHz turbo frequency. Sixteen gigabytes of DDR4 2933 MHz registered ECC memory occupy two of the 16 available DIMM slots.

Who this suits and who it does not

This blade targets data-center teams that need dense compute for virtualization, private cloud or high-performance computing and can manage memory expansion up to the platform limit of 1.5 TB. Buyers who need more storage bays, GPU acceleration or an operating system pre-installed should evaluate other configurations.

Deciding specification: dual 1.92 TB SATA SSDs

Two 1.92 TB SATA solid-state drives connect to the PERC H330 controller, which supports RAID 0, 1, 5, 10 and 50 for redundancy or capacity tuning. The 10 Gb dual-port 57810S-K network daughter card and iDRAC9 Enterprise remote management complete the I/O and administration baseline.

Kohokohdat

  • Two 24-core Xeon Platinum 8260 processors deliver high parallel throughput
  • 16 GB DDR4 registered ECC memory supports reliable multi-tasking
  • Dual 1.92 TB SATA SSDs give fast read access for active datasets
  • PERC H330 controller enables RAID 0/1/5/10/50 for data protection
  • iDRAC9 Enterprise provides remote management and automation

Tekniset tiedot

BrandDELL
SeriesPowerEdge M640
TypeBlade
Rack HeightBlade
CPU TypeIntel Xeon
CPU Speed2.40 GHz
CPU SocketLGA 3647
Number of CPU Cores24-Core Processor
# of Processors Installed2
MAX Processors2
Installed Memory Size16GB
Memory TypeDDR4
Max Memory Capacity2TB
Number of Memory Slots16
Storage ControllerDell Perc H330 Controller
HDD InterfaceSATA/SAS
SSD (Installed)2 x 1.92TB SATA SSD
Raid LevelRAID 0/1/5/10/50
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card
Management PortRJ 45
Operating SystemNo

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this blade fit and run in my existing M1000e chassis alongside older PowerEdge M-series blades?

The M640 is a half-height blade that installs in both PowerEdge MX and M1000e chassis, so it shares the same enclosure infrastructure as earlier M-series blades.

How can I verify the dual Xeon 8260 CPUs and 16 GB DDR4 are recognised and healthy after the blade is seated?

Log into iDRAC9 Enterprise — it displays processor core count, clock speeds, memory population and health status for both CPUs and all DIMM slots.

Which items ship with the blade and which must I order separately for a working server?

The unit includes two Xeon 8260 processors, 16 GB DDR4, two 1.92 TB SATA SSDs, PERC H330 controller and 57810S-K 10 Gb dual-port network card; front bezel, rails and operating system are not included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.